SMD power inductor microgate MPIE252010-1R0M-LF with 1.020 inductance and 2.30 amp saturation current
Product Overview
The MPIE252010 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by SHENZHEN MICROGATE TECHNOLOGY CO., LTD.
Product Attributes
- Brand: MICROGATE
- Origin: Shenzhen, P.R.C.
- Certifications: Lead-free products (LF)
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR Max () | Isat Max (A) | Irms Typ (A) |
| MPIE252010-R24M-LF | 0.2420% | 0.030 | 4.00 | 4.30 |
| MPIE252010-R33M-LF | 0.3320% | 0.038 | 3.80 | 3.90 |
| MPIE252010-R47M-LF | 0.4720% | 0.038 | 3.70 | 3.90 |
| MPIE252010-R68M-LF | 0.6820% | 0.053 | 3.00 | 3.20 |
| MPIE252010-1R0M-LF | 1.020% | 0.072 | 2.30 | 2.60 |
| MPIE252010-1R5M-LF | 1.520% | 0.103 | 2.00 | 2.10 |
| MPIE252010-2R2M-LF | 2.220% | 0.130 | 1.50 | 2.00 |
| MPIE252010-3R3M-LF | 3.320% | 0.210 | 1.45 | 1.50 |
| MPIE252010-4R7M-LF | 4.720% | 0.318 | 1.20 | 1.20 |
| MPIE252010-6R8M-LF | 6.820% | 0.470 | 1.00 | 1.10 |
| MPIE252010-100M-LF | 1020% | 0.600 | 0.75 | 0.80 |
| MPIE252010-150M-LF | 1520% | 0.990 | 0.50 | 0.50 |
Dimensions
| Dimensions in mm | A | B | C | D | E | f | g | h |
| Value | 2.500.20 | 2.000.20 | 1.00Max. | 0.800.2 | 0.800.2 | 0.80 Typ. | 2.50 Typ. | 2.00 Typ. |
Operating Conditions
Product normal work ambient temperature: -40 ~ +125.
Recommended Soldering Conditions
Product can be applied to flow and reflow soldering.
Flux
- Use rosin-based flux. Dont use highly acidic flux with halide content exceeding 0.2wt% (chlorine conversion value).
- Use Sn solder.
Flow Soldering Conditions
Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150 max. Cooling into solvent after soldering also should be in such a way that temperature difference is limited to 100 max. Unwrought pre-heating may cause cracks on the product, resulting in the deterioration of products quality.
Reflow Soldering Conditions
Profile Feature:
- Average Ramp-Up Rate (Ts max. to Tp): 3/second max.
- Preheat (Ts min. to Ts max.): 150 to 200 , 60-180 seconds.
- Time maintained above Temperature (TL): 217 , 60-150 seconds.
- Peak/Classification Temperature (Tp): 260 , 3-4 seconds.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.