SMD power inductor microgate MPIT5040-4R7M-LF featuring lead free construction and ferrite core for electronics

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The MPIT series of SMD power inductors are designed for various electronic applications. These inductors are constructed with high-quality materials, including a ferrite core and enameled copper wire, ensuring reliable performance and durability. They are lead-free and suitable for both flow and reflow soldering processes.

Product Attributes

Brand: MPIT (implied by product name)
Material: Ferrite Core, Enameled Copper Wire, Sn99.7-Cu0.3 Solder, Epoxy Adhesive
Certifications: Lead Free Products

Technical Specifications

Part No.	Inductance (uH)	DCR (m)max	Isat (A) max	Irms (A) max
MPIT5040-1R0N-LF	1.030%	13	7.35	4.9
MPIT5040-1R5N-LF	1.530%	15	6.30	4.2
MPIT5040-2R2N-LF	2.230%	19	4.90	3.7
MPIT5040-3R3N-LF	3.330%	24	3.95	3.4
MPIT5040-4R7M-LF	4.720%	30	3.50	3.0
MPIT5040-5R6M-LF	5.620%	33	3.2	2.5
MPIT5040-6R8M-LF	6.820%	49	3.0	2.3
MPIT5040-100M-LF	1020%	64	2.85	2.1
MPIT5040-150M-LF	1520%	86	2.5	2.0
MPIT5040-220M-LF	2220%	129	1.8	1.4
MPIT5040-330M-LF	3320%	188	1.5	1.2
MPIT5040-470M-LF	4720%	270	1.25	1.0
MPIT5040-680M-LF	6820%	400	0.96	0.77
MPIT5040-101M-LF	10020%	560	0.82	0.66
MPIT5040-221M-LF	22020%	1030	0.55	0.45

Item	Specifications	Test Method/Condition
Operating temperature range	25~ +85	Including temperature rise due to self-generated heat
Terminal strength-pull test	Terminal shall not be loosened or ruptured	A 5N. load shall be applied to both terminals in the axis direction for 60 sec.
Solderability test	The terminal shall be at least 90% covered with solder.	After fluxing, Inductor shall be dipped in a melted solder bath at 2305for 5 seconds.
Resistance to solvent test	There shall be no case deformation change in appearance obliteration of marking.	MIL-STD-105E
Vibration test (low frequency)	1.Inductors shall be no evidence of electrical and mechanical damage. 2.Inductance shall not change more than=5%. 3.Q shall not change more than=20%	1.Amplitude:1.5mm. 2.Frequency:10~55~10Hz/min. 3.Direction:X.Y.Z. 4.Duration:2 hrs/X.Y.Z.
Shock test	Inductors shall be dropped 10 from a height of 1m onto 3cm wooden board.
Resistance to soldering heat		Temp:2605,Time:101sec
High temperature load life test	There shall be no evidence of Short or open circuiting.	1. temp:852. 2. time: 100012 hours. 3. load: allowed DC current.
Humidity load life		1. temp: 402. 2. R.H: 90-95%. 3. time: 100012 hours. 4. load: allowed DC current.
Temperature characteristic	1. Inductors shall be no evidence of electrical and mechanical damage 2. Inductance shall not change more than5%. 3. Q shall not change more than 30%.	25~ +85
Humidity test		1. Temp:402. 2. R.H:90-95%. 3. Time:962 hours.
Cold test		1. Temp:-402. 2. Time:962 hours.
Thermal shock test
Dry heat test		1. temp:852 2. time: 962 hours