automotive electronics SMD power inductor Microgate AMPIT3015-2R2M-LF with 2.22 microhenry inductance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The AMPIT3015 series of SMD Power Inductors are designed for automotive electronics applications. These inductors offer reliable performance and are built with high-quality materials to meet stringent automotive standards.
Product Attributes
- Brand: MICROGATE
- Origin: SHENZHEN MICROGATE TECHNOLOGY CO., LTD.
- Certifications: ROHS COMPLIANT, AEC-Q200
Technical Specifications
| Microgate Part No. | Inductance L (uH) | DCR() Max. | DCR() Typ. | Isat1 (A) Max. | Isat1 (A) Typ. | Irms2 (A) Max. | Irms2 (A) Typ. |
| AMPIT3015-1R0M-LF | 1.020% | 0.040 | 0.030 | 2.65 | 2.80 | 2.65 | 2.85 |
| AMPIT3015-1R5M-LF | 1.520% | 0.055 | 0.045 | 2.55 | 2.75 | 2.30 | 2.60 |
| AMPIT3015-2R2M-LF | 2.220% | 0.072 | 0.060 | 1.95 | 2.10 | 2.10 | 2.25 |
| AMPIT3015-3R3M-LF | 3.320% | 0.102 | 0.085 | 1.65 | 1.75 | 1.75 | 1.85 |
| AMPIT3015-4R7M-LF | 4.720% | 0.145 | 0.120 | 1.35 | 1.45 | 1.40 | 1.50 |
| AMPIT3015-6R8M-LF | 6.820% | 0.200 | 0.170 | 1.00 | 1.15 | 1.20 | 1.30 |
| AMPIT3015-100M-LF | 1020% | 0.300 | 0.250 | 0.85 | 1.00 | 1.00 | 1.05 |
| AMPIT3015-120M-LF | 1220% | 0.300 | 0.250 | 0.75 | 0.85 | 1.00 | 1.05 |
| AMPIT3015-150M-LF | 1520% | 0.420 | 0.350 | 0.70 | 0.80 | 0.85 | 0.95 |
| AMPIT3015-220M-LF | 2220% | 0.545 | 0.440 | 0.55 | 0.65 | 0.75 | 0.85 |
| AMPIT3015-470M-LF | 4720% | 1.200 | 1.000 | 0.40 | 0.45 | 0.50 | 0.55 |
| No. | Item | Requirements | Test Methods and Remarks | Reference | Sample Size |
| 1 | Solderability | Terminal area shall be at least 95% covered. | Temperature:240 5, flux 5-10 s. Sample immersion tin furnace 3 1s. Sn/3.0Ag/0.5Cu | AEC-Q200 (J-STD-002) | 15 |
| 2 | Resistance to Soldering Heat | (1) No case deformation or change in appearance. (2)L0/L010% | The peak temperature: 260+5/-0. Reflow:3times. Temperature curve is as below: | AEC-Q200 (MIL-STD-202 Method 210) | 30 |
| 3 | High Temperature Storage | (1) No case deformation or change in appearance. (2)L0/L010% | Temperature: 1502. Time : 1000(+48,0) hours. Measurement at 244 hours after test conclusion. | AEC-Q200 (MIL-STD -202 Method 108) | 77 |
| 4 | Low Temperature Storage | (1) No case deformation or change in appearance. (2)L0/L010% | Temperature: -552. Time : 1000(+48,0) hours. Measurement at 244 hours after test conclusion. | ||
| 5 | Temperature Cycling | (1) No case deformation or change in appearance. (2)L0/L010% | First -55 for 30 minutes, last 150 30minutes as 1 cycle. Go through 1000 cycles.. Max transfer time is 20 second. Measurement at 244 hours after test conclusion. | AEC-Q200 (JESD22-A104) | 77 |
| 6 | Resistance to Solvents | (1) No case deformation or change in appearance. (2)L0/L010% | Prepare solvent (isopropyl alcohol: kerosene: ethylbenzene =4:9:3 volume ) Specimen be completely immersed in solvent for 3+0.5/-0min Brush dipped in solution until wetted and brush part 10 strokes . Repeat 2 more times, Air blow dry. Inspect at 3x magnifier for marking and 10x for part damage. Note: Add Aqueous wash chemical. OKEM Clean or equivalent. Do not use banned solvents. | AEC-Q200 (MIL-STD-202 Method 215) | 15 |
| 7 | ESD | (1) No case deformation or change in appearance. (2)L0/L010% | HBM ESD discharge waveform,8KV | AEC-Q200 (AEC-Q200- 002) | 15 |
| 8 | Biased Humidity | (1) No case deformation or change in appearance. (2)L0/L010% | 1000(+48,0) hours, 85C/85%RH. Unpowered. Measurement at 244 hours after test conclusion. | AEC-Q200 (MIL-STD -202 Method 103) | 77 |
| 9 | Terminal Strength | (1) No case deformation or change in appearance. (2)L0/L010% | The test samples shall be soldered to the board. 17.64N, 601s | AEC-Q200 (AEC-Q200-006) | 30 |
| 10 | Board Flex | (1) No case deformation or change in appearance. (2)L0/L010% | Part mounted on a 100mm*40mm FR4 PCB board, which is 1.60.2 mm thick and as a Layer-thickness 35 m 10 m. Bending speed is 1mm/s. Keeping the P.C Board 2 mm minimum for 60 seconds. | AEC-Q200 (AEC-Q200-005) | 30 |
| 11 | Vibration | (1) No case deformation or change in appearance. (2)L0/L010% | Frequency range : 10~2000Hz. Amplitude: 1.5mm ,5g. Sweep time and duration: 10~2000~10Hz for 20 minutes. Each four hours(12 times) in X,Y,Z direction, 12 hours in total. | AEC-Q200 (MIL-STD-202 Method 204) | 30 |
| 12 | Mechanical Shock | (1) No case deformation or change in appearance. (2)L0/L010% | Half sine shock pulse,100g,6ms,6 shocks in each 3 mutually perpendicular directions (total of 18 shocks) | AEC-Q200 (MIL-STD-202 Method 213) | 30 |
| 13 | Loading at High Temperature | (1) No case deformation or change in appearance. (2)L0/L010% | Temperature: 1502. Time : 1000 (+48,0) hours. Applied Current : Rated current. Measurement at 244 hours after test conclusion. | AEC-Q200 (MIL-PRF-27) | 77 |
| 14 | Loading at Damp Heat | (1) No case deformation or change in appearance. (2)L0/L010% | Temperature: 602, Humidity: 90% to 95% RH. Time : 1000 (+48,0) hours. Applied Current : Rated current. Measurement at 244 hours after test conclusion. | AEC-Q200 | 77 |
| 15 | Drop | (1) No case deformation or change in appearance. (2)L0/L010% | Height: 1 m, Free fall, 10times. Direction: 1 Angle, 1side, 2surface. | AEC-Q200 | 30 |
| 16 | Flammability (External Flame) | (1) No case deformation or change in appearance. (2)L0/L010% | Method111/UL94 | AEC-Q200 | 15 |
| 17 | Random Vibration | (1) No case deformation or change in appearance. (2)L0/L010% | Three Times reflow pretreatment (reflow TMAX265 + | AEC-Q200 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina