SMD power inductor microgate MPIT5040-100M-LF with lead free construction and electrical performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The MPIT series of SMD power inductors are designed for various electronic applications. These inductors offer reliable performance with specified electrical characteristics, construction details, and reliability testing.

Product Attributes

Brand: MICROGATE (implied from text)
Series: MPIT
Lead Free: Yes

Technical Specifications

Part No.	Inductance (uH)	DCR (m)max	Isat (A) max	Irms (A) max	Operating Temperature Range	Storage Temperature Range
MPIT5040-1R0N-LF	1.030%	13	7.35	4.9	-40~85	-40~125
MPIT5040-1R5N-LF	1.530%	15	6.30	4.2	-40~85	-40~125
MPIT5040-2R2N-LF	2.230%	19	4.90	3.7	-40~85	-40~125
MPIT5040-3R3N-LF	3.330%	24	3.95	3.4	-40~85	-40~125
MPIT5040-4R7M-LF	4.720%	30	3.50	3.0	-40~85	-40~125
MPIT5040-5R6M-LF	5.620%	33	3.2	2.5	-40~85	-40~125
MPIT5040-6R8M-LF	6.820%	49	3.0	2.3	-40~85	-40~125
MPIT5040-100M-LF	1020%	64	2.85	2.1	-40~85	-40~125
MPIT5040-150M-LF	1520%	86	2.5	2.0	-40~85	-40~125
MPIT5040-220M-LF	2220%	129	1.8	1.4	-40~85	-40~125
MPIT5040-330M-LF	3320%	188	1.5	1.2	-40~85	-40~125
MPIT5040-470M-LF	4720%	270	1.25	1.0	-40~85	-40~125
MPIT5040-680M-LF	6820%	400	0.96	0.77	-40~85	-40~125
MPIT5040-101M-LF	10020%	560	0.82	0.66	-40~85	-40~125
MPIT5040-221M-LF	22020%	1030	0.55	0.45	-40~85	-40~125

Item	Specifications	Test Method/Condition
Operating temperature range	25~ +85	Including temperature rise due to self-generated heat
Terminal strength-pull test	Terminal shall not be loosened or ruptured	A 5N. load shall be applied to both terminals in the axis direction for 60 sec.
Solderability test	The terminal shall be at least 90% covered with solder.	After fluxing, Inductor shall be dipped in a melted solder bath at 2305for 5 seconds.
Resistance to solvent test	There shall be no case deformation change in appearance obliteration of marking.	MIL-STD-105E
Vibration test (low frequency)	1.Inductors shall be no evidence of electrical and mechanical damage. 2.Inductance shall not change more than=5%. 3.Q shall not change more than=20%	1.Amplitude:1.5mm. 2.Frequency:10~55~10Hz/min. 3.Direction:X.Y.Z. 4.Duration:2 hrs/X.Y.Z.
Shock test	Inductors shall be dropped 10 from a height of 1m onto 3cm wooden board.
Resistance to soldering heat		Temp:2605,Time:101sec
High temperature load life test	There shall be no evidence of Short or open circuiting.	1. temp:852. 2. time: 100012 hours. 3. load: allowed DC current.
Humidity load life		1. temp: 402. 2. R.H: 90-95%. 3. time: 100012 hours. 4. load: allowed DC current.
Temperature characteristic	1. Inductors shall be no evidence of electrical and mechanical damage 2. Inductance shall not change more than5%. 3. Q shall not change more than 30%.	25~ +85
Humidity test		1. Temp:402. 2. R.H:90-95%. 3. Time:962 hours.
Cold test		1. Temp:-402. 2. Time:962 hours.
Thermal shock test
Dry heat test		1. temp:852 2. time: 962 hours