Compact SMD Power Inductor Microgate MPIT8040-1R5M-LF Featuring Ag Ni Sn Cu Terminals and Epoxy Resin
SMD Power Inductor - MPIT8040 Series
The MPIT8040 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by SHENZHEN MICROGATE TECHNOLOGY CO., LTD.
Product Attributes
- Brand: MICROGATE
- Origin: Shenzhen, P.R.C.
- Material: Ni-Zn Ferrite core, Enameled Copper Wire, Ag/Ni/Sn/Cu terminals, Epoxy resin and magnetic powder glue.
- Certifications: Lead-free products (LF).
Technical Specifications
| Microgate Part No. | Inductance (uH) | DCR () Max. | Isat (A) Max. | Irms (A) Max. | SRF (MHz) Typ. |
| MPIT8040-R47N-LF | 0.4730% | 0.007 | 0.005 | 16.5 | 110 |
| MPIT8040-R68N-LF | 0.6830% | 0.007 | 0.005 | 15.5 | 104 |
| MPIT8040-R82M-LF | 0.8220% | 0.008 | 0.006 | 15.2 | 95 |
| MPIT8040-R90M-LF | 0.9020% | 0.008 | 0.006 | 11.0 | 92 |
| MPIT8040-1R0M-LF | 1.020% | 0.008 | 0.006 | 12.0 | 90 |
| MPIT8040-1R4M-LF | 1.420% | 0.009 | 0.007 | 9.00 | 68 |
| MPIT8040-1R5M-LF | 1.520% | 0.010 | 0.008 | 10.0 | 67 |
| MPIT8040-1R8M-LF | 1.820% | 0.012 | 0.009 | 9.50 | 48 |
| MPIT8040-2R0M-LF | 2.020% | 0.012 | 0.009 | 9.25 | 42 |
| MPIT8040-2R2M-LF | 2.220% | 0.016 | 0.012 | 8.30 | 41 |
| MPIT8040-3R0M-LF | 3.020% | 0.018 | 0.014 | 7.10 | 30 |
| MPIT8040-3R3M-LF | 3.320% | 0.020 | 0.015 | 7.52 | 28 |
| MPIT8040-3R6M-LF | 3.620% | 0.020 | 0.015 | 7.52 | 30 |
| MPIT8040-3R9M-LF | 3.920% | 0.022 | 0.017 | 6.30 | 26 |
| MPIT8040-4R7M-LF | 4.720% | 0.023 | 0.018 | 6.00 | 23 |
| MPIT8040-5R1M-LF | 5.120% | 0.025 | 0.019 | 6.00 | 23 |
| MPIT8040-5R6M-LF | 5.620% | 0.027 | 0.021 | 6.00 | 24 |
| MPIT8040-6R2M-LF | 6.220% | 0.027 | 0.021 | 5.10 | 20 |
| MPIT8040-6R8M-LF | 6.820% | 0.031 | 0.024 | 4.95 | 20 |
| MPIT8040-8R2M-LF | 8.220% | 0.034 | 0.026 | 4.30 | 17 |
| MPIT8040-100M-LF | 1020% | 0.038 | 0.029 | 4.30 | 15 |
| MPIT8040-120M-LF | 1220% | 0.053 | 0.041 | 3.55 | 12 |
| MPIT8040-150M-LF | 1520% | 0.061 | 0.047 | 3.25 | 12 |
| MPIT8040-180M-LF | 1820% | 0.068 | 0.052 | 3.10 | 11 |
| MPIT8040-220M-LF | 2220% | 0.086 | 0.066 | 2.80 | 9.5 |
| MPIT8040-270M-LF | 2720% | 0.101 | 0.078 | 2.60 | 9.0 |
| MPIT8040-330M-LF | 3320% | 0.125 | 0.096 | 2.20 | 8.0 |
| MPIT8040-360M-LF | 3620% | 0.133 | 0.102 | 2.10 | 7.8 |
| MPIT8040-390M-LF | 3920% | 0.133 | 0.102 | 2.10 | 7.8 |
| MPIT8040-430M-LF | 4320% | 0.147 | 0.113 | 1.90 | 7.5 |
| MPIT8040-470M-LF | 4720% | 0.177 | 0.136 | 1.80 | 6.5 |
| MPIT8040-510M-LF | 5120% | 0.185 | 0.142 | 1.70 | 6.4 |
| MPIT8040-560M-LF | 5620% | 0.192 | 0.148 | 1.65 | 6.4 |
| MPIT8040-620M-LF | 6220% | 0.237 | 0.182 | 1.55 | 6.3 |
| MPIT8040-680M-LF | 6820% | 0.252 | 0.194 | 1.50 | 5.0 |
| MPIT8040-750M-LF | 7520% | 0.274 | 0.211 | 1.40 | 4.9 |
| MPIT8040-820M-LF | 8220% | 0.293 | 0.225 | 1.30 | 5.7 |
| MPIT8040-910M-LF | 9120% | 0.354 | 0.272 | 1.20 | 5.0 |
| MPIT8040-101M-LF | 10020% | 0.377 | 0.29 | 1.20 | 4.2 |
| MPIT8040-121M-LF | 12020% | 0.428 | 0.329 | 1.15 | 3.5 |
| MPIT8040-151M-LF | 15020% | 0.533 | 0.410 | 1.10 | 3.5 |
| MPIT8040-221M-LF | 22020% | 0.702 | 0.540 | 0.85 | 3.5 |
| MPIT8040-331M-LF | 33020% | 1.066 | 0.820 | 0.70 | 2.8 |
Dimensions
| Dimensions in mm | A | B | C | D | E | f | g | h |
| Value | 8.00.3 | 8.00.3 | 4.2 Max. | 3.8 0.3 | 2.100.30 | 3.8 Typ. | 8.2 Typ. | 7.5Typ. |
Operating Conditions
- Ambient Temperature: -40 to +125
Reliability and Test Conditions
High temperature storage test: 1252 for 1000 hours. No case deformation or change in appearance. Inductance change 10%.
Low temperature storage test: -402 for 1000 hours. No case deformation or change in appearance. Inductance change 10%.
Humidity test: 25-85, 85% RH for 1000 hours. No case deformation or change in appearance. Inductance change 10%.
Thermal shock test: 1000 cycles of -40 for 30 min to 125 for 30 min.
Solderability test: Terminal area must have 90% min. solder coverage after dipping in solder at 2455 for 50.1 seconds.
Heat endurance of reflow soldering: 3 reflow cycles with peak temperature 260+5/-0. No case deformation or change in appearance. Inductance change 10%.
Vibration test: 10~55Hz, 1.5mm amplitude in each of 3 perpendicular directions for 2 hours each (total 6 hours).
Drop test: 10 drops from 1m onto a concrete floor.
Terminal strength push test: 17.64N force applied for 10 seconds after soldering to PCB.
Loading at High Temperature: 852 for 1000 hours with rated current applied. No case deformation or change in appearance. Inductance change 10%.
Recommended Soldering Conditions
Suitable for flow and reflow soldering. Use rosin-based flux. Do not use highly acidic flux with halide content exceeding 0.2wt%.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.