High current SMD power inductor Microgate MPIT4018-330M-LF suitable for demanding electronic circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The MPIT4018 series is a range of SMD power inductors designed for various electronic applications. These inductors offer reliable performance and are manufactured by SHENZHEN MICROGATE TECHNOLOGY CO., LTD. in China.

Product Attributes

Brand: MICROGATE
Origin: P.R.C.
Product Name: SMD power inductor
Series: MPIT4018 series
Environmental Compliance: Lead free products (LF)

Technical Specifications

Microgate Part No.	Inductance (uH)	DCR () Max.	DCR () Typ.	Isat (A) Max.	Isat (A) Typ.	Irms (A) Max.	Irms (A) Typ.
MPIT4018-R24M-LF	0.2420%	0.016	0.012	6.50	7.00	4.60	5.00
MPIT4018-R68M-LF	0.6820%	0.025	0.021	6.00	7.00	3.80	4.15
MPIT4018-1R0M-LF	1.020%	0.030	0.025	4.55	4.85	3.40	3.80
MPIT4018-1R2M-LF	1.220%	0.030	0.025	4.20	4.80	3.40	3.80
MPIT4018-1R5M-LF	1.520%	0.036	0.030	3.90	4.25	2.95	3.20
MPIT4018-2R2M-LF	2.220%	0.048	0.040	3.15	3.40	2.60	2.90
MPIT4018-2R7M-LF	2.720%	0.060	0.050	2.70	3.00	2.20	2.50
MPIT4018-3R3M-LF	3.320%	0.060	0.050	2.70	3.00	2.20	2.50
MPIT4018-3R9M-LF	3.920%	0.078	0.065	2.60	2.80	2.00	2.20
MPIT4018-4R7M-LF	4.720%	0.078	0.065	2.10	2.30	2.00	2.20
MPIT4018-6R8M-LF	6.820%	0.108	0.090	1.70	1.85	1.70	1.90
MPIT4018-100M-LF	1020%	0.168	0.140	1.40	1.55	1.20	1.30
MPIT4018-150M-LF	1520%	0.228	0.190	1.15	1.25	1.00	1.20
MPIT4018-220M-LF	2220%	0.336	0.280	1.00	1.10	0.95	1.10
MPIT4018-330M-LF	3320%	0.480	0.400	0.80	0.90	0.75	0.85
MPIT4018-470M-LF	4720%	0.720	0.600	0.70	0.80	0.60	0.70
MPIT4018-560M-LF	5620%	0.912	0.760	0.65	0.80	0.53	0.58
MPIT4018-101M-LF	10020%	1.740	1.450	0.45	0.55	0.30	0.35
MPIT4018-221M-LF	22020%	3.600	3.000	0.30	0.34	0.21	0.23

Item	Required Characteristics	Test Method/Condition
High temperature storage test	1. No case deformation or change in appearance. 2. Inductance change 10% \|L\|/L10%	Temperature: 1252 Time: 1000 hours Measurement at 244 hours after test conclusion.
Low temperature storage test	Inductance change 10% \|L\|/L10%	Temperature: -552 Time: 1000 hours Measurement at 244 hours after test conclusion.
Humidity test	Inductance change 10% \|L\|/L10%	Temperature: 85, Humidity: 85% RH Time: 1000 hours Measurement at 244 hours after test conclusion.
Thermal shock test	Inductance change 10% \|L\|/L10%	-40 for 30min to 125 for 30min, 1000 cycles.
Solderability test	Terminal area must have 90% min. solder coverage.	Dip pads in flux then dip in solder pot at 2455 for 50.1 second. Solder: Sn96.5%Ag3%Cu0.5%. Flux: rosin flux.
Heat endurance of reflow soldering	1. No case deformation or change in appearance. 2. Inductance change 10% \|L\|/L10%	Refer to reflow curve, 3 times. Peak temperature: 260+5/-0.
Vibration test	Inductance change 10% \|L\|/L10%	10~55Hz, 1.5mm amplitude in each of 3 mutually perpendicular directions for 2 hours each (total 6 hours).
Drop test	No damage.	Drop 10 times on a concrete floor from a height of 1m.
Terminal strength push test	Terminal should not pull off.	Pulling test: 17.64N force for 10s. Bending test: 2mm deflection at 0.5mm/sec speed.
Loading at High Temperature	1. No case deformation or change in appearance. 2. Inductance change 10% \|L\|/L10%	Temperature: 852 Time: 1000 hours Apply rated current. Measurement at 244 hours after test conclusion.