General Purpose Ceramic Capacitors muRata GRM1555C1H120JA01D 12pF 0402 Size DC 50 V Rated Voltage
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product specification applies to Chip Multilayer Ceramic Capacitors for General Electronic equipment. These capacitors are designed for general-purpose applications and offer reliable performance.
Product Attributes
- Brand: MURATA
- Part Number: GRM1555C1H120JA01_
- Packaging Code: D, J, W
Technical Specifications
| Part Number | Size Code | Temperature Characteristics | Rated Voltage | Nominal Capacitance | Capacitance Tolerance | Packaging | Packaging Unit |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 10000 pcs./Reel (W8P2) |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 20000 pcs./Reel (W8P1) |
| GRM1555C1H120JA01_ | 0402 | C0G(EIA) | DC 50 V | 12pF | +/-5 % | PAPER Tape | 50000 pcs./Reel (W8P2) |
Specifications and Test Methods
| Item | Specification | Test Method | |
| Rated Voltage | DC 50 V | Shown in Rated value. | |
| Dimension | 0402 | Shown in Rated value. Using Measuring instrument of dimension. | |
| Temperature Characteristics | C0G(EIA) | +/-0.05 0.5 +/-0.05 0.5 +/-0.05 D (8)Code Packaging Unit MURATA PART NO. Packaging GRM1555C1H120JA01_ (1)-1 L (1)-2 W (2) T e 0.15 to 0.35 Dimensions(mm) 0.3 min. W 10000 pcs./Reel 20000 pcs./Reel 180mm Reel PAPER Tape W8P2 180mm Reel PAPER Tape W8P1 J 330mm Reel PAPER Tape W8P2 50000 pcs./Reel 0+/-30 ppm/ DC 50 V (1)L/W Dimensions (2)T Dimensions (3)Temperature Characteristics (4)Rated Voltage (5)Nominal Capacitance (6)Capacitance Tolerance (8)Packaging Code (7)Muratas Control Code GRM 15 5 5C 1H 120 J A01 D GRM1555C1H120JA01-01A | Reflow 25 to 125 12pF +/-5 % -55 to 125 Operating Temp. Range |
| Nominal Capacitance | 12pF | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Capacitance Tolerance | +/-5 % | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Voltage Proof | No defects or abnormalities. | Test Voltage : 300% of the rated voltage Applied Time : 1s to 5s Charge/Discharge Current : 50mA max. | |
| Insulation Resistance(I.R.) | More than 10000M | Measurement Voltage : Rated Voltage Charging Time : 2min Charge/Discharge Current : 50mA max. | |
| Q or Dissipation Factor (D.F.) | Q400+20C C:Nominal Capacitance(pF) | Measurement Temperature : Room Temperature Measurement Frequency : 1.0+/-0.1MHz Measurement Voltage : 0.5 to 5.0Vrms | |
| Capacitance Change (Temperature Characteristics) | Within +/-0.2% or +/-0.05pF (Whichever is larger) | The capacitance change should be measured after 5 minutes at each specified temperature stage. | |
| Adhesive Strength of Termination | No removal of the terminations or other defect should occur. | Applied Force : 5N Holding Time : 10+/-1 Applied Direction : In parallel with the test substrate and vertical with the capacitor side | |
| Vibration | Appearance: No defects or abnormalities. Capacitance: Within the specified initial value. Q or D.F.: Within the specified initial value. | Total Amplitude : 1.5mm Vibration Time : 1min This motion should be applied for a period of 2hours in each 3 mutually perpendicular directions(total of 6hours). | |
| Substrate Bending Test | Appearance: No defects or abnormalities. Capacitance: Within +/-5% or +/-0.5pF (Whichever is larger) | Flexure : 1mm Holding Time : 5+/-1s | |
| Solderability | 95% of the terminations is to be soldered evenly and continuously. | Solder bath method Flux : Solution of rosin ethanol 25(mass)% Preheat : 80 to 12010s to 30s Solder : Sn-3.0Ag-0.5Cu(Lead Free Solder) Test Temp. : 245+/-5 Test Time : 2+/-0.5s | |
| Resistance to Soldering Heat | Appearance: No defects or abnormalities. Capacitance: Within +/-2.5% or +/-0.25pF (Whichever is larger) Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder bath method Solder : Sn-3.0Ag-0.5Cu(Lead Free Solder) Solder Temp. : 270+/-5 Test Time : 10+/-0.5s Preheat Temp. : 120 to 150 Preheat Time : 1min Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| Temperature Sudden Change | Appearance: No defects or abnormalities. Capacitance: Within +/-2.5% or +/-0.25pF (Whichever is larger) Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Cycles : 5 cycles Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| High Temperature High Humidity (Steady) | Appearance: No defects or abnormalities. Capacitance: Within +/-7.5% or +/-0.75pF (Whichever is larger) Q or D.F.: Q100+10C/3 C:Nominal Capacitance(pF) I.R.: More than 500M or 25F (Whichever is smaller) | Test Temperature : 40+/-2 Test Humidity : 90%RH to 95%RH (Steady) Test Time : 500+/-12h Test Voltage : Rated Voltage Charge/Discharge Current : 50mA max. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. | |
| Durability | Appearance: No defects or abnormalities. Capacitance: Within +/-3% or +/-0.3pF (Whichever is larger) Q or D.F.: Q275+5C/2 C:Nominal Capacitance(pF) I.R.: More than 1000M or 50F (Whichever is smaller) | Test Temperature : Maximum Operating Temperature+/-3 Test Time : 1000+/-12h Test Voltage : 200% of the rated voltage Charge/Discharge Current : 50mA max. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina