0201 Size Ceramic Capacitors muRata GRM033R61E104KE14D with X5R Temperature Characteristics and 25V
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
Chip Multilayer Ceramic Capacitors for General Electronic equipment. Designed for general-purpose applications, these capacitors offer reliable performance in a compact 0201 size with X5R temperature characteristics.
Product Attributes
- Brand: MURATA
- Origin: Not specified
- Material: Ceramic
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Part Number | Size Code | Temperature Characteristics | Nominal Capacitance | Capacitance Tolerance | Rated Voltage | Packaging | Dimensions (mm) L/W | Dimensions (mm) T |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-10% | DC 25 V | 15000 pcs./Reel (W8P2, 180mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-15% | DC 25 V | 30000 pcs./Reel (W8P1, 180mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
| GRM033R61E104KE14 | 0201 | X5R (EIA) | 0.1uF | +/-15% | DC 25 V | 50000 pcs./Reel (W8P2, 330mm Reel PAPER Tape) | 0.6 +/-0.03 | 0.3 +/-0.03 |
Specifications and Test Methods
| No. | Item | Specification | Test Method (Ref. Standard:JIS C 5101, IEC60384) |
| 1 | Rated Voltage | Shown in Rated value. | The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. |
| 2 | Appearance | No defects or abnormalities. | Visual inspection. |
| 3 | Dimension | Shown in Rated value. | Using Measuring instrument of dimension. |
| 4 | Voltage Proof | No defects or abnormalities. | Measurement Point : Between the terminations Test Voltage : 250% of the rated voltage Applied Time : 1s to 5s Charge/Discharge Current : 50mA max. |
| 5 | Insulation Resistance(I.R.) | More than 50F | Measurement Temperature:Room Temperature Measurement Point : Between the terminations Measurement Voltage : Rated Voltage Charging Time : 1min Charge/Discharge Current : 50mA max. |
| 6 | Capacitance | Shown in Rated value. | Measurement Temperature:Room Temperature Measurement Frequency : 1.0+/-0.1kHz Measurement Voltage : 1.0+/-0.2Vrms |
| 7 | Q or Dissipation Factor (D.F.) | DF:0.1 max. | Measurement Temperature : Room Temperature Measurement Frequency : 1.0+/-0.1kHz Measurement Voltage : 1.0+/-0.2Vrms |
| 8 | Capacitance | Within +/-15% (No bias) | Measurement Temperature: Room Temperature, Measurement Frequency: 1.0+/-0.1kHz, Measurement Voltage: Less than 1.0Vrms. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
| 9 | Adhesive Strength of Termination | No removal of the terminations or other defect should occur. | Solder the capacitor on the test substrate shown in Fig.3. Termination Applied Force : 2N Holding Time : 10+/-1 Applied Direction : In parallel with the test substrate and vertical with the capacitor side |
| 10 | Vibration | Appearance: No defects or abnormalities. Capacitance: Within the specified initial value. Q or D.F.: Within the specified initial value. | Solder the capacitor on the test substrate shown in Fig.3. Kind of Vibration : Simple harmonic motion 10Hz to 55Hz to 10Hz Vibration Time : 1min Total Amplitude : 1.5mm This motion should be applied for a period of 2hours in each 3 mutually perpendicular directions(total of 6hours). |
| 11 | Substrate Bending Test | Appearance: No defects or abnormalities. Capacitance: Within +/-10% | Solder the capacitor on the test substrate shown in Fig.1. Pressurization Method : Shown in Fig.2. Flexure : 1mm Change Holding Time : 5+/-1s Soldering Method : Reflow soldering |
| 12 | Solderability | 95% of the terminations is to be soldered evenly and continuously. | Solder bath method, Flux: Solution of rosin ethanol 25(mass)%, Preheat: 80 to 12010s to 30s, Solder: Sn-3.0Ag-0.5Cu(Lead Free Solder), Test Temp. : 245+/-5, Test Time : 2+/-0.5s |
| 13 | Resistance to Soldering Heat | Appearance: No defects or abnormalities. Capacitance: Within +/-15%. Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder bath method, Solder: Sn-3.0Ag-0.5Cu(Lead Free Solder), Solder Temp. : 270+/-5, Test Time : 10+/-0.5s, Preheat Temp. : 120 to 150, Preheat Time : 1min. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
| 14 | Temperature Sudden Change | Appearance: No defects or abnormalities. Capacitance: Within +/-7.5%. Q or D.F.: Within the specified initial value. I.R.: Within the specified initial value. Voltage Proof: No defects. | Solder the capacitor on the test substrate shown in Fig.3. Cycles : 5 cycles. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Let sit for 24+/-2hours at room temperature, then measure. |
| 15 | High Temperature High Humidity (Steady) | Appearance: No defects or abnormalities. Capacitance: Within +/-12.5%. Q or D.F.: DF:0.2 max. I.R.: More than 500M or 12.5F (Whichever is smaller) | Solder the capacitor on the test substrate shown in Fig.3. Test Temperature : 40+/-2, Test Humidity : 90%RH to 95%RH (Steady), Test Time : 500+/-12h, Test Voltage : Rated Voltage. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
| 16 | Durability | Appearance: No defects or abnormalities. Capacitance: Within +/-12.5%. Q or D.F.: DF:0.2 max. I.R.: More than 1000M or 25F (Whichever is smaller) | Solder the capacitor on the test substrate shown in Fig.3. Test Temperature : Maximum Operating Temperature+/-3, Test Time : 1000+/-12h, Test Voltage : 150% of the rated voltage. Pre-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. Post-treatment : Heat treatment at 150+0/-10C for 1hour and then let sit for 24+/-2hours at room temperature, then measure. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina