Signal Noise Suppression Chip Common Mode Choke Coil muRata DLM0NSB120HY2D with Monolithic Structure

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Chip Common Mode Choke Coil DLM0NS Series

The DLM0NS Series Chip Common Mode Choke Coil is designed for differential signal interface in electronics. These monolithic, magnetically shielded coils offer effective noise suppression and signal integrity for various electronic applications.

Product Attributes

Brand: MURATA MFG.CO., LTD
Product Type: Chip Common Mode Choke Coil
Series: DLM0NS
Structure: Monolithic Type
Circuit Type: Magnetically shielded one circuit type
Polarity: No polarity
Marking: No Marking

Technical Specifications

Murata Part Number	Common Mode Impedance (at 100MHz)	Rated Voltage	Rated Current	DC Resistance	Insulation Resistance	Cut-off Frequency	Operating Temperature	Storage Temperature
DLM0NSB120HY2D	125	5V(DC)	160mA	1.225%	10M min.	8GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSB120HY2B	125	5V(DC)	160mA	1.225%	10M min.	8GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSB280HY2D	2830%	5V(DC)	130mA	1.925%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSB280HY2B	2830%	5V(DC)	130mA	1.925%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSN500HY2D	5025%	5V(DC)	100mA	2.725%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSN500HY2B	5025%	5V(DC)	100mA	2.725%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSN900HY2D	9025%	5V(DC)	100mA	4.025%	10M min.	2GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSN900HY2B	9025%	5V(DC)	100mA	4.025%	10M min.	2GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSM900HY2D	9025%	5V(DC)	100mA	3.825%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C
DLM0NSM900HY2B	9025%	5V(DC)	100mA	3.825%	10M min.	5GHz(Typ.)	-40 to +85C	-40 to +85C

Dimensions

Unit Mass (Typical): 0.9mg

Dimensions (LW): Not specified in detail, but packaging dimensions indicate tape width of 8mm and pitch of 2mm.

Packaging

Packaging Code: D (Taping) / B (Bulk)

Taping Specification: 8mm-wide, 2mm pitch Paper tape

Packing Quantity: 10,000 pcs./reel
Packing Method: Products packed in base tape cavity and sealed by Cover tape.
Sprocket Hole: To the right as tape is pulled toward the user.
Spliced Point: Cover tape has no spliced point.
Missing Components: Within 0.1% of the number per reel or 1 pc., whichever is greater, and not continuous.
Pull Strength of Paper Tape: 5N min.
Pull Strength of Cover Tape: 10N min.
Peeling off force of Cover Tape: 0.1 to 0.6N (Minimum value is Typical) at 300 mm/min.

Caution

Mounting Direction: Mount products in the correct direction. Wrong direction (90 rotated) can cause open/short circuits, flames, or other serious trouble.
Limitation of Applications: Contact manufacturer before using in applications requiring especially high reliability to prevent defects that might directly cause damage to third party's life, body, or property. This includes aircraft, aerospace, undersea, power plant control, medical, transportation, traffic signal, disaster prevention/crime prevention, data-processing equipment, and similar applications.
Corrosive Gas: Refrain from use in environments with corrosive gases (sulfur gas, chlorine, ammonia, etc.) or oils (cutting oil, silicone oil, etc.) that have come into contact with the aforementioned gases.