SMD Block Type EMIFIL muRata BNX023-01L with 20A Rated Current and Wide Operating Temperature Range

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

SMD Block Type EMIFIL BNX02-01

This reference specification applies to the SMD Block Type EMIFIL, designed for noise suppression applications. These filters offer effective EMI reduction across a wide frequency range, making them suitable for various electronic circuits requiring clean signal integrity.

Product Attributes

Brand: MURATA MFG.CO.,LTD.
Type: SMD Block Type EMIFIL

Technical Specifications

Part Number	Capacitance	Rated Voltage (DC)	Withstanding Voltage (DC)	Rated Current (DC)	DC Resistance	Insulation Resistance	Insertion Loss	Voltage Drop	Operating Temperature	Storage Temperature
BNX022-01L BNX022-01K BNX022-01B	1.0F15%	50V	125V	20A	0.43m 0.20m	500M min.	35dB min. (1MHz to 1GHz)	30 mV max.	-40 C to +125 C	-55 C to +125 C
BNX023-01L BNX023-01K BNX023-01B	1.0F15%	100V	250V	20A	0.43m 0.20m	500M min.	35dB min. (1MHz to 1GHz)	45mV max.	-40 C to +125 C	-55 C to +125 C
BNX028-01L BNX028-01K BNX028-01B	47F20 50%	16V	40V	20A	0.43m 0.20m	1.1M min.	35dB min. (30KHz 1GHz)	45mV max.	-40 C to +105 C	-55 C to +125 C
BNX029-01L BNX029-01K BNX029-01B	100F20 50%	6.3V	15.8V	20A	0.43m 0.20m	0.5M min.	35dB min. (15KHz 1GHz)	45mV max.	-40 C to +125 C	-55 C to +125 C

Standard Testing Conditions

Temperature: Ordinary Temp. 15 C to 35 C (In case of doubt: 20 C 2 C)

Humidity: Ordinary Humidity 25 %(RH) to 85 %(RH) (In case of doubt: 60 %(RH) to 70 %(RH))

Atmospheric pressure: 86kPa to 106kPa

Dimensions and Mass

Unit Mass (Typical value): 0.80g

Marking

Filter shall be marked with Murata Mark, Part Number (e.g., BNX022 for BNX022-01), and Polarity Marking ().

Electrical Performance Summary

Insertion Loss: Meets item 3 specification.
Capacitance: Measured per specified conditions for each series.
DC Resistance: Measured by 4-terminal method.
Insulation Resistance: Measured at DC rated voltage.
Withstanding Voltage: Filter shall be no failure under specified test voltages.
Voltage Drop: Meets item 3 specification.

Mechanical Performance Summary

Appearance and Dimensions: Visual inspection and measurement.
Marking: Visual inspection.
Reflow Solderability: Appropriate solder fillet formation required.
Resistance to soldering iron: Tested under specified conditions.
Bending Strength: Tested on glass-epoxy substrate.
Drop: Tested by free fall on concrete or steel board.
Vibration: Tested on glass-epoxy substrate with specified oscillation frequency and amplitude.
Shock: Tested on glass-epoxy substrate with specified acceleration and waveform.

Environmental Performance Summary

Heat Shock: Tested for specified cycles and temperature conditions.
Humidity Life: Tested under specified temperature, humidity, and voltage conditions.
Heat Life: Tested under specified temperature and voltage conditions.

Packaging Specification

Appearance and Dimensions: 24mm-wide plastic tape with specified dimensions.
Taping: Products packaged in plastic tape cavities.
Packing Quantity: 400 pcs./reel (178mm), 1500 pcs./reel (330mm).