Noise Suppression Coil Murata DLW21PH201XQ2L for Automotive Electronics AEC Q200 Certified Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The Murata DLW21PHXQ2 series Chip Common Mode Choke Coil is designed for automotive electronics applications and is AEC-Q200 qualified. These coils are engineered to suppress common mode noise, ensuring reliable operation of electronic systems in demanding automotive environments.

Product Attributes

Brand: MURATA MFG CO., LTD
Certification: AEC-Q200
Application: Automotive Electronics

Technical Specifications

Murata Part Number	Common Mode Impedance () at 100 MHz	Rated Voltage (VDC)	Withstanding Voltage (VDC)	Rated Current* (mA) Ambient Temp 105C	Rated Current* (mA) Ambient Temp 125C	DC Resistance ()	Insulation Resistance (M min.)	ESD Rank
DLW21PH201XQ2L	20025%	20	50	500	350	0.1420%	10	5B

Test Item	Specification	Test Method/Conditions
High temperature exposure	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	1000 h at 125C (Set for 24 h at room condition, then measured)
Temperature cycling	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	1000 cycles -40C to +125C (Set for 24 h at room condition then measured)
Biased humidity	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	1000 h at 85C, 85% (RH). Apply max rated voltage and rated current. (Set for 24 h at room condition, then measured)
Operational life	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	Apply 125C 1000 h (Set for 24 h at room condition then measured)
Mechanical shock	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	Per MIL-STD-202 Method 213 Condition F: 1500 g's/0.5 ms/half sine
Vibration	Appearance:No damage Common mode impedance change rate: within 20%	5 g's for 20 min, 12 cycles each of 3 orientations (Test from 10 Hz to 2000 Hz)
Resistance to Soldering Heat	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	Solder temperature 260C5C, Immersion time 10 s (Deviation for AEC-Q200: Pre-heating: 150C/60s)
ESD	Appearance: No damage Common mode impedance change rate: within 20% Insulation resistance: 10 M min. DC resistance change rate: within 30%	ESD Rank: Refer to chapter 3 (Per AEC-Q200-002)
Solderability	95% or more of the outer electrode shall be covered with new solder seamlessly. (except exposed wire)	Per J-STD-002 (Deviation for AEC-Q200: Method b: Not applicable, Pre-heating: 150C/60s)
Board Flex	Appearance:No damage Common mode impedance change rate: within 20%	Deflection 2 mm (min.) 60 s minimum holding time (Deviation for AEC-Q200: Epoxy-PCB thickness: 1.0 mm)
Terminal Strength	Appearance: No damage	A force of 17.7 N for 60 s (Deviation for AEC-Q200: Applying force: 10 N)