Three Terminal Low ESL Capacitors muRata NFM15PC435R0G3D Multilayer Ceramic Type for Electronic Equipment

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product specification is applied to Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) used for General Electronic equipment. These capacitors offer low ESL and are designed for general-purpose applications, featuring a 3-terminal construction.

Product Attributes

Brand: MURATA
Packaging Code: R0G3
Reference Sheet: NFM15PC435R0G3_(0402, 4.3uF, DC4V)

Technical Specifications

Item	Specification	Test Method
Nominal Capacitance	4.3 uF	Frequency: 1.00.1kHz (Cap.) Voltage: 0.5V0.1V(rms)
Capacitance Tolerance	±20 %
DC Rated Voltage	4 V
Rated Current	2A(DC)
DC Resistance	30mΩmax.	Measured with 100mA max.
Insulation Resistance	25MΩmin.	Voltage: Rated Voltage x 300% Time: 2 minutes max.
Operating Temperature Range	-55 to 85 °C	Includes self-heating
Storage Temperature Range	-55 to 85 °C
Dimensions (L x W x T)	1.00.1 x 0.50.2 x 0.40.1 mm
Packaging	180mm Reel PAPER W8P2 10000 pcs./Reel
Appearance	No defects or abnormalities.	Visual inspection.
Solderability	Electrodes shall be at least 90% covered with new solder coating.	Flux: Ethanol solution of rosin, 25(wt)% Pre-heat: 150±10°C, 60 to 90s Solder: Sn-3.0Ag-0.5Cu Solder Temperature: 240 ± 3°C Immersion Time: 3±1 s Immersion and emersion rates: 25mm / s
Resistance to soldering heat	Appearance No damaged Cap. Change Within ±7.5% DC Resistance 0.05Ω max.	Flux: Ethanol solution of rosin, 25(wt)% Pre-heat: 150±10°C, 60 to 90s Solder: Sn-3.0Ag-0.5Cu Solder Temperature: 270 ± 5°C Immersion Time: 10 ± 1 s Immersion and emersion rates: 25mm / s
Bending Strength	Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max.	It shall be soldered on the glass-epoxy substrate. (100×40×0.8mm). Deflection: 1.0 mm Keeping Time: 5 s
Drop	Appearance No damaged Capacitance Meet the initial rated value. DC Resistance 0.05Ω max.	It shall be dropped on concrete or steel board. Height: 1m Method: Free fall Attitude from which the product is dropped: 3 directions
Bonding Strength	Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max.	It shall be soldered on the glass-epoxy substrate. Applying Force (F): 5 N Applying Time: 5 s
Vibration	Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max.	It shall be soldered on the glass-epoxy substrate. Oscillation Frequency: 10 to 2000 to 10Hz for 20 minute. Total amplitude 3.0 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours)
Temperature Cycling	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max.	1 Cycle Temperature: Min Op. Temp. +0/-3°C / 30+3/-0 min, Room Temp. / within 3 min, Max Op. Temp. +3/-0°C / 30+3/-0 min, Room Temp. / within 3 min. Total of 10 cycles.
Humidity	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. DC Resistance 0.05Ω max.	Temperature: 40±2°C Humidity: 90 to 95%(RH) Time: 500+24/-0 hours
Heat Life	Appearance No damaged Cap. Change Within ±12.5% I.R. 473,104 224,474 105MΩ min. 435 5MΩ min. DC Resistance 0.05Ω max.	Temperature: Max Operating Temperature ± 2 °C Test Voltage: Rated Voltage x 100% Charge Current: 50 mA max. Time: 1000+48/-0 hours