Large Current Low ESL Multilayer Ceramic Capacitor 3 Terminals muRata NFM18PC474R0J3D for Noise Suppression

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

NFM18PC474R0J3_ is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers low ESL and is suitable for applications requiring filtering and noise suppression.

Product Attributes

Brand: MURATA
Packaging: 8mm-wide paper tape, 4000 pcs./Reel

Technical Specifications

Item	Specification	Test Method
Nominal Capacitance	0.47 uF	Frequency : 1.00.1kHz (Cap.) Voltage : 10.2V(rms)
Capacitance Tolerance	20 %
DC Rated Voltage	DC 6.3 V
Rated Current	2A(DC)
DC Resistance	30mmax.	Measured with 100mA max.
Insulation Resistance	1000Mmin.	Voltage : Rated Voltage Time : 2 minutes max.
Operating Temp. Range	-55 to 125 C	Includes self-heating
Storage Temp. Range	-55 to 125 C
Dimensions (L x W x T)	1.60.1 x 0.80.1 x 0.60.1 mm	Using calipers.
Packaging Code	D
Appearance	No defects or abnormalities.	Visual inspection.
Solderability	Electrodes shall be at least 90% covered with new solder coating.	Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 3C Immersion Time : 31 s
Resistance to soldering heat	No failure after tested.	Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 5C Immersion Time : 10 1 s
Bending Strength	Deflection : 2 mm Keeping Time : 30 s	Soldered on glass-epoxy substrate (100401.0mm).
Drop	Height : 1m Method : Free fall Attitude : 3 directions	Dropped on concrete or steel board.
Bonding Strength	Applying Force (F) : 9.8 N Applying Time : 10 s	Soldered on glass-epoxy substrate.
Vibration	Oscillation Frequency : 10 to 2000 to 10Hz for 20 minute. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours)	Soldered on glass-epoxy substrate. Preconditioning : Heat treatment (150+0 / -10 C,1hour)
Temperature Cycling	10 cycles	-55+0 / -3C (30+3 / -0 min) -> Room Temp. (within 3 min) -> Max Operating Temp. +3 / -0C (30 +3 / -0 min) -> Room Temp. (within 3 min)
Humidity	500+24 / -0 hours	Temperature : 402C Humidity : 90 to 95%(RH)
Heat Life	1000+48 / -0 hours	Temperature : Maximum Operating Temperature 2 C Test Voltage : Rated Voltage x 200% Charge Current : 50 mA max.