Ceramic 3 Terminal Low ESL Capacitor muRata NFM21CC471R1H3D Suitable for Electronic Equipment Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The NFM21CC471R1H3 is a 3-terminal Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers excellent performance with low equivalent series inductance (ESL) and is suitable for various applications requiring stable capacitance and high reliability.

Product Attributes

Brand: MURATA
Material: Ceramic

Technical Specifications

Item	Specification	Test Method
Nominal Capacitance	470 pF	Frequency (Cap.) 22 to 100pF : 1±0.1MHz 220 to 22000pF : 1±0.1kHz Voltage : 1±0.2V(rms)
Capacitance Tolerance	±20 %	Rated Voltage Time : 2 minutes max.
DC Rated Voltage	DC 50 V	-
Rated Current (mA)	1A(DC)	-
DC Resistance	300mΩmax.	Measured with 100mA max.
Insulation Resistance (I.R.)	1000MΩmin.	Test Voltage : 150V(DC) Time : 1 to 5 s Charge Current : 50mA max.
Operating Temperature Range	-55 to 125 °C	-
Storage Temperature Range	-55 to 125 °C	-
Dimensions (L x W x T)	2.0±0.2 x 1.25±0.1 x 0.85±0.1 mm	-
Terminal Dimensions (e, f)	e: 0.3±0.2 mm, f: 0.2 min.	-
Packaging	180mm Reel PAPER W8P4	4000 pcs./Reel
Appearance	No defects or abnormalities.	Visual inspection.
Solderability	Electrodes shall be at least 90% covered with new solder coating.	Flux : Solution of rosin ethanol 25(mass)% Pre-heat : 150±10°C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240±3°C Immersion Time : 3±1s Immersion and emersion rates : 25mm/s
Resistance to soldering heat	Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	Flux : Solution of rosin ethanol 25(mass)% Pre-heat : 150±10°C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270±5°C Immersion Time : 10±1s Immersion and emersion rates : 25mm/s
Bending Strength	Appearance No damaged Cap. Change Within ±12.5% Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	It shall be soldered on the glass-epoxy substrate(t=1.0mm). Deflection : 2mm Keeping Time : 30s
Drop	Appearance No damaged Capacitance Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	It shall be dropped on concrete or steel board. Method : Free fall Height : 75cm Attitude from which the product is dropped : 3 directions
Bonding Strength	The electrodes shall be no failure after tested.	It shall be soldered on the glass-epoxy substrate. Applying Force (F) : 9.8N Applying Time : 30s
Vibration	Appearance No damaged Cap. Change Within ±7.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	It shall be soldered on the glass-epoxy substrate. Oscillation Frequency : 10 to 55 to 10Hz for 1 minute. Double Amplitude : 1.5mm Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours)
Temperature Cycling	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	1 Cycle: 1 step : -55+0/-3 / 30+3/-0 min 2 step : Room Temperature/within 3 min 3 step : +125+3/-0 / 30+3/-0 min 4 step : Room Temperature / within 3 min Total of 10 cycles
Humidity	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	Temperature : 40±2°C Humidity : 90 to 95%(RH) Time : 500+24/-0 hours
Heat Life	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	Temperature : 125±2°C Test Voltage : Rated Voltage x 200% Charge Current : 50mA max. Time : 1000+48/-0 hours
Cold Resistance	Appearance No damaged Cap. Change Within ±12.5% I.R. Meet the initial rated value. Rdc 22 to 2200pF 0.5Ω max. 22000pF 0.05Ω max.	Temperature : -55±2°C Time : 500+24/-0 hours