electronic component Nantong Jianghai Capacitor PCR1VEG681MC16LL50WP conductive polymer solid aluminum electrolytic capacitor

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HEG Series capacitors are conductive polymer solid aluminum electrolytic capacitors designed for various electronic applications. They offer reliable performance and are manufactured by Nantong Jianghai Capacitor Co., Ltd.

Product Attributes

Brand: Jianghai
Origin: China
Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
Series: HEG Series
Customer P/N: PCR1VEG681MC16LL50WP
Manufacturer: Nantong Jianghai Capacitor Co., Ltd.
Address: No.79 South Tongyang Road Pingchao Town Nantong City Jiangsu Province PR China

Technical Specifications

Item	Specifications	Test Method
Rated voltage	35 V
Rated capacitance	680 F (20, 120Hz)
Case size	10 16
Tolerance on rated capacitance	20 %
Surge voltage	40.3 V
Leakage current	4760 A (max.) (20, After 2 minutes)	See specifications list; Protective resistor: 1,000 . Applied rated voltage 2 minutes. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h.
Tangent of loss angle (tan)	12 % (max.) (20, 120Hz)	See specifications list; Measuring temperature: 202
Equivalent series resistance (ESR)	18 m (max.) (100 kHz)	See specifications list; Frequency: 100 kHz10%; Measuring voltage: 0.5Vrms, Measuring temperature: 202
Rated ripple current	4690 mA (105 , 100kHz)
Category temperature range	-55 to 105
Lifespan	105 , 2000 h
Frequency coefficient for ripple current		Frequency: 120Hz1kHz (0.05), 1kHz10kHz (0.3), 10kHz100kHz (0.7), 100kHz500kHz (1.0)
Solderability		Solder bath method; Flux: Rosin // Ethanol, About 25 wt% Sn-Ag-Cu solder; Temperature: 2453, Duration: 20.3 seconds. At least 95% of circumferential surface of the termination shall be covered with new solder.
Robustness of Appearance (Lead wire strength)		Tensile Ua1: d (mm) 0.3d0.5 (5 N, 10 1 s); 0.5d0.8 (10 N, 10 1 s). Bending Ub: d (mm) 0.3d0.5 (2.5 N, 0.25kg); 0.5d0.8 (5 N, 0.51kg). No visible damage, Legible marking.
Resistance to soldering heat		Capacitance change: Within 5% of initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. A) Solder bath method: Temperature: 2605C, Duration: 10 1 seconds. B) Soldering iron method: Temperature: 40010C, Duration: 3+1/0 seconds. Heat protector: t=1.6 mm glass-epoxy board.
Vibration		Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz); Amplitude: 0.75 mm (Total excursion 1.5 mm); Direction: X, Y, Z (3 axes); Duration: 2 hours / axial (Total 6 hour). Capacitance change: Within 5% of the initial value. Appearance: No visible damage, Legible marking.
Rapid change of temperature		Applied voltage: Without load; Cycle number: 5 cycles. Capacitance change: Within 10% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking. TA= -55 TB= 105
Shelf Life		Temperature: 105 2; Time: 1000+36 hours. Voltage treatment: The DC rated voltage shall be applied across the capacitor and its protective resistor (1K) for 30 minutes. The capacitor shall then be stored under standard atmospheric conditions for 24 to 48 hours. Capacitance change: Within 20% of the initial value. Tan: Within 2 times of the value of item 2. Leakage current: Within the value of item 2.
Endurance		Temperature: 105 2; Duration: 2000 +48/-0h; Applied voltage: Rated voltage. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking.
Damp heat, steady state		Temperature: 602; Relative humidity: 90 to 95%; Duration: 1,000 +24/-0hours. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. (After voltage treatment). Appearance: No visible damage, Legible marking.
Surge		Temperature: Room temperature; Applied voltage: 40.3 V; Protective resistor: 1 k; Cycle number: 1,000 times. Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. (A) Charging: 305 seconds (B) Discharging: 5.5 minutes.