Aluminum Electrolytic Capacitor 50V 100uF 8x115mm Nantong Jianghai Capacitor ECR1HLH101MLL080011 Load Life 7000 Hours
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Specification - CD281L Series Aluminum Electrolytic Capacitor
This product specification is adapted to CD281L series Aluminum Electrolytic Capacitors produced by Nantong Jianghai Capacitor Co.,Ltd. These capacitors are designed for a wide operating temperature range of -55 to +105.
Product Attributes
- Brand: (Nantong Jianghai Capacitor Co.,Ltd)
- Origin: P.R. China
- Product Series: CD281L Series
- Product Name: Aluminum Electrolytic Capacitor
- Date of Issue: December 31, 2019
Technical Specifications
| Customer P/N | Jianghai P/N | Voltage WV (V) | Capacitance CAP (uF) | Leakage Current LC (uA) 20 2min | Dissipation Factor tan (%) 120Hz | Impedance () 100KHz 20 | Ripple Current (mArms) at 105 100KHz | Load Life (hrs) | Dimensions DxL mmxmm |
| ECR1HLH101MLL080011 | 50 | 100 | 100 | 0.2 | 360 | 7000 | 8*11.5 |
General Specifications
| Item | Conditions | Specifications |
| Operating Temperature Range | -55+105 | |
| Surge Voltage | Rated voltage (V) | 6.3, 10, 16, 25, 35, 50, 63, 100 |
| Surge voltage (V) | 7.2, 13, 20, 32, 44, 63, 79, 125 | |
| Dissipation Factor (20, 120HZ) | Rated voltage (V) | 6.3, 10, 16, 25, 35, 50, 63, 100 |
| Tan (%) MAX | 22, 19, 16, 14, 12, 10, 9, 8 | |
| Capacitance Range | 0.47uF - 15000uF | |
| Marking | Item | Contents |
| 1. Brand | ||
| 2. Products series | CD281L | |
| 3. Upper temperature limit | 105 | |
| 4. Year code | ||
| 5. Rated voltage | ||
| 6. Capacitance | ||
| 7. Polarity |
Performance Characteristics
| No. | Items | Conditions | Specifications |
| 9.1 | Maximum permissible ripple current | Temperature: 1052; Voltage: DC Voltage + peak ripple voltage Rated voltage | Refer to spec. list |
| 9.2 | Surge Voltage Test | 1000 cycles at specified temperature (30s charge, 5min 30s discharge), 1-2 hours thermal stability. Test voltage: see item 3; Test Temperature: 1530 | Leakage Current: Not more than specified value; Capacitance change: Within 15% of initial value; Dissipation Factor: Not more than specified value |
| 9.3 | Capacitance (Tolerance) | Measuring frequency: 120 HZ; Measuring voltage: 0.5Vrms; DC bias voltage: +1.52.0 V DC | Capacitance Tolerance: 20% |
| 9.4 | Dissipation Factor (tg) | Same conditions as Capacitance measurement | Refer to table 4 |
| 9.5 | Leakage Current | 6.3--100WV: Less than 0.02CV or 3uA whichever larger (2min) | Leakage current: (I)=E/Rs |
| 9.6 | Characteristic at High and low temperature | Step 1: Measure Capacitance, Dissipation Factor and impedance. Step 2: Store at -55(-40)3 for 2 hours, then measure. Step 4: Store at 1052 for 2 hours, then measure. | Step 2: Impedance ratio (vs Step 1) per 9.10; Capacitance change (vs Step 1): -200%; Step 4: Capacitance change (vs Step 1): 0+20%; Leakage Current: Less than 500% of specified value |
| 9.7 | Pressure relief | AC test: AC voltage 0.7 x rated DC voltage or 250V AC (whichever is lower), Frequency: 50/60Hz. DC test: Reversed polarity DC rated voltage, current limited to 1A. | No fire, explosion, or separation of case/seal. Applicable to capacitors with diameter 6mm. |
| 9.8 | Load life | 1052, applied max ripple current, DC+AC peak voltage rated voltage. Duration per table. Measured after 16 hours at standard conditions. | Leakage current: Initial specified value; Capacitance change: Within 25% of initial value; Dissipation factor: 200% of initial specified value |
| 9.9 | Shelf life | Temp: 1052, Time: 1000+36 hours. DC rated voltage applied for 30 mins through 1K resistor, then stored 24-48 hours at standard conditions. | Leakage current: Initial specified value; Capacitance change: Within 20% of initial value; Dissipation factor: 200% of initial specified value |
| 9.10 | Impedance stability | Rated voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance (120Hz) Z -55/+20: 3 |
| 9.11 | Solder ability | Solder press time: 20.5s; Solder temperature: 2455 | At least 90% of circumferential surface of the dipped portion of termination shall be covered with new solder |
| 9.12 | Resistance to soldering heat | Test Temperature: 260 5; Test time: 101s | Leakage Current: Not more than specified value; Capacitance Change: Within 10% of initial value; Dissipation Factor: Not More than specified value; Appearance: No defects |
| 9.13 | Resistance of damp heat | Test Temperature: 40 2; Humidity: 90-95% |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina