Durable Aluminium Electrolytic Capacitor Nantong Jianghai Capacitor PCR0EHN821MB08LL35WP for Electronic Circuits
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The HPN Series is a range of Aluminium electrolytic capacitors with conductive polymer solid electrolyte, designed for various electronic applications. These capacitors offer reliable performance and durability.
Product Attributes
- Brand: Nantong Jianghai Capacitor Co., Ltd.
- Origin: China
- Product Type: Conductive polymer solid aluminum electrolytic capacitor
- Series: HPN Series
- Product Code: PCR0EHN821MB08LL35WP
- Customer P/N: Not specified
- Default Marking Color: Red (adjustable per customer request)
Technical Specifications
| Item | Specifications | Test Method/Conditions |
| Rated voltage | 2.5 V | |
| Rated capacitance | 820 F | 20, 120Hz |
| Case size | 8 8 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 2.9 V | |
| Leakage current | 500 A (max.) | 20, After 2 minutes |
| Tangent of loss angle (tan) | 8 % (max.) | 20, 120Hz |
| Equivalent Series Resistance (ESR) | 7 m (max.) | 100 kHz |
| Rated ripple current | 6100 mA | 105 , 100kHz |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | 120Hz1kHz: 0.05; 1kHz10kHz: 0.3; 10kHz100kHz: 0.7; 100kHz500kHz: 1.0 | |
| Leakage current (Test Method) | See specifications list | Series resistor: 1,000 . Applied rated voltage 2 minutes. Voltage treatment: Apply rated voltage for 2h at 105 2 with 1,000 resistor, then cool and store for 12-24h. |
| Capacitance (Test Method) | See specifications list | Measuring circuit: Equivalent series circuit. Frequency: 120 Hz10%. Measuring voltage: 0.5 Vrms. |
| Tangent of loss angle (tan) (Test Method) | See specifications list | Measuring temperature: 202. |
| Equivalent Series Resistance (ESR) (Test Method) | See specifications list | Frequency: 100 kHz10%. Measuring voltage: 0.5Vrms, Measuring temperature: 202. |
| Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. | Flux: Rosin // Ethanol, About 25 wt%. Solder bath method: 2453 for Sn-Ag-Cu solder, Duration: 30.3 seconds. |
| Robustness of Appearance (Tensile) | No visible damage, Legible marking | Ua1: See table for force and time based on diameter (d). |
| Robustness of Appearance (Bending) | No visible damage, Legible marking | Ub: See table for force and cycles based on diameter (d). |
| Resistance to soldering heat (Capacitance change) | Within 5% of the initial value | A) Solder bath method: 2605C, 10 1 sec. B) Soldering iron method: 40010C, 3+1/0 sec. |
| Resistance to soldering heat (tan) | Within the value of item 2. | |
| Resistance to soldering heat (Leakage current) | Within the value of item 2. | |
| Resistance to soldering heat (Appearance) | No visible damage, Legible marking | Heat protector: t=1.6 mm glass-epoxy board. |
| Vibration (Capacitance) | Capacitance value shall not show drastic change compared to the initial capacitance when measured within 30 minutes. | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz). Amplitude: 0.75 mm (Total excursion 1.5 mm). Direction: X, Y, Z (3 axes). Duration: 2 hours / axial (Total 6 hour). Capacitors are supported as shown in figure. |
| Vibration (Capacitance change) | Within 5% of the initial value | |
| Vibration (Appearance) | No visible damage, Legible marking | |
| Rapid change of temperature (Capacitance change) | Within 10% of the initial value | Applied voltage: Without load. Cycle number: 5 cycles. TA= -55 TB= 105 . |
| Rapid change of temperature (tan) | Within the value of item 2. | |
| Rapid change of temperature (Leakage current) | Within the value of item 2. | |
| Rapid change of temperature (Appearance) | No visible damage, Legible marking | |
| Shelf Life (Capacitance change) | Within 20% of the initial value | Temperature: 105 2. Time: 1000+36 hours. Voltage treatment: Apply rated voltage for 30 minutes with protective resistor (1K), discharge, and store at room temperature for 2448 hours. |
| Shelf Life (tan) | Within 2 times of the value of item 2. | |
| Shelf Life (Leakage current) | Within the value of item 2. | |
| Endurance (Capacitance change) | Within 20% of the initial value | Temperature: 105 2. Duration: 2000 +48/-0h. Applied voltage: Rated voltage. |
| Endurance (tan) | Within 1.5 times of the value of item 2. | |
| Endurance (ESR) | Within 1.5 times of the value of item 2. | |
| Endurance (Leakage current) | Within the value of item 2. | |
| Endurance (Appearance) | No visible damage, Legible marking | |
| Damp heat, steady state (Capacitance change) | Within 20% of the initial value | Temperature: 602. Relative humidity: 90 to 95%. Duration: 1,000 +24/-0 hours. |
| Damp heat, steady state (tan) | Within 1.5 times of the value of item 2. | |
| Damp heat, steady state (ESR) | Within 1.5 times of the value of item 2. | |
| Damp heat, steady state (Leakage current) | Within the value of item 2. | (After voltage treatment) |
| Damp heat, steady state (Appearance) | No visible damage, Legible marking | |
| Surge (Capacitance change) | Within 20% of the initial value | Temperature: Room temperature. Applied voltage: 2.9 V. Protective resistor: 1 k. Cycle number: 1,000 times. (A) Charge: 305 sec. (B) Discharge: 5.5 minutes. |
| Surge (tan) | Within 1.5 times of the value of |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina