Aluminium electrolytic capacitors HEG series with conductive polymer Nantong Jianghai Capacitor PCR1EEG101MCACLL50WP designed
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification is applicable to HEG series aluminum electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are designed for various applications requiring reliable performance and specific electrical characteristics.
Product Attributes
- Brand: Jianghai (JH)
- Origin: Nantong, China
- Product Type: Aluminium electrolytic capacitors with conductive polymer solid electrolyte
- Series: HEG Series
- Customer P/N: JH-HEG1E101M-1
- Issue No.: G.HEG.202108016
- Specification Version: A
- Customer Version: A0
- Date: 2021.8.5
- Manufacturer: Nantong Jianghai Capacitor Co., Ltd.
- Address: No.79 South Tongyang Road Pingchao Town Nantong City Jiangsu Province PR China
Technical Specifications
| Item | Specifications | Test Method |
|---|---|---|
| Rated voltage | 25 V | |
| Rated capacitance | 100 F | 20,120Hz |
| Case size | 10 12.5 | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | 28.8 V | |
| Leakage current | 500 A (max.) | 20, After 2 minutes |
| Tangent of loss angle (tan) | 12 % (max.) | 20,120Hz |
| Equivalent Series Resistance (ESR) | 14 m (max.) | 100 kHz |
| Rated ripple current | 5000 mA | 105 100kHz |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Frequency coefficient for ripple current | Frequency: 120Hz1kHz (0.05), 1kHz10kHz (0.3), 10kHz100kHz (0.7), 100kHz500kHz (1.0) | |
| Leakage current | See specifications list | Series resistor: 1,000 Applied rated voltage 2 minutes. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| Capacitance | See specifications list | Measuring circuit: Equivalent series circuit Frequency: 120 Hz10% Measuring voltage: 0.5 Vrms |
| Tangent of loss angle (tan) | See specifications list | Measuring temperature: 202 |
| Equivalent Series Resistance (ESR) | See specifications list | Frequency: 100 kHz10% Measuring voltage: 0.5Vrms, Measuring temperature: 202 |
| Solderability | At least 95% of circumferential surface of the termination shall be covered with new solder. | Solder bath method Flux: Rosin // Ethanol, About 25 wt% 2453 for Sn-Ag-Cu solder Duration: 20.3 seconds |
| Robustness of Appearance | No visible damage, Legible marking | Tensile Ua1: Applied force as per table below. Bending Ub: Performed as described in the table. |
| Resistance to soldering heat | Capacitance change: Within 5% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking | A) Solder bath method Temperature: 2605C, Duration: 10 1 seconds B) Soldering iron method Temperature: 40010C, Duration: 3+1/0 seconds Heat protector: t=1.6 mm glass-epoxy board. |
| Vibration | Capacitance value shall not show drastic change compared to the initial capacitance when measured within 30 minutes. Capacitance change: Within 5% of the initial value. Appearance: No visible damage, Legible marking | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz) Amplitude: 0.75 mm (Total excursion 1.5 mm) Direction: X, Y, Z (3 axes) Duration: 2 hours / axial (Total 6 hour) |
| Rapid change of temperature | Capacitance change: Within 10% of the initial value. Tan: Within the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking | Applied voltage: Without load Cycle number: 5 cycles TA= -55 TB= 105 |
| Shelf Life | Capacitance change: Within 20% of the initial value. Tan: Within 2 times of the value of item 2. Leakage current: Within the value of item 2. | Temperature: 105 2 Time: 1000+36 hours Voltage treatment: The DC rated voltage shall be applied across the capacitor and its protective resistor (1K) for 30 minutes. The capacitor shall then be stored under standard atmospheric conditions for 24 to 48 hours. |
| Endurance | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. Appearance: No visible damage, Legible marking | Temperature: 105 2 Duration: 2000 +48/-0h Applied voltage: Rated voltage |
| Damp heat, steady state | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. ESR: Within 1.5 times of the value of item 2. Leakage current: Within the value of item 2. (After voltage treatment) Appearance: No visible damage, Legible marking | Temperature: 602 Relative humidity: 90 to 95% Duration: 1,000 +24/-0 hours |
| Surge | Capacitance change: Within 20% of the initial value. Tan: Within 1.5 times of the value of item 2. | Temperature: Room temperature Applied voltage: 28.8 V Protection resistor: 1 k Cycle number: 1,000 times Charging: 305 seconds |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina