Aluminum electrolytic capacitor NCC EKXJ451ELL101MM30S featuring PET sleeve and 450VDC rated voltage
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification defines the requirements for aluminum electrolytic capacitors, specifically the KXJ series. These capacitors are designed for various electronic applications requiring reliable performance and durability.
Product Attributes
- Brand: Nippon Chemi-Con Corporation
- Origin: Japan
- Sleeve Material: PET
- Terminal Plating Material: Sn
- Certifications: RoHS Directive (2011/65/EU)
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Temperature Range | -40 to +105 | |
| Rated Voltage Range | 450VDC | |
| Capacitance Tolerance | -20 to +20% | |
| Surge Voltage | 495VDC (at 450VDC rated voltage) | See Table-1 |
| Dissipation Factor (tan ) | See Standard Rating Table | |
| Leakage Current | See Standard Rating Table | Measured after specified period at rated voltage with 1000 resistor. Shall not exceed specified values. |
| Rated Ripple Current | See Standard Rating Table | Multipliers provided for different frequencies. |
| Marking | Rated voltage, Rated capacitance, Upper category temperature, Negative polarity marking, Manufacturers identification mark, Capacitance tolerance code, Lot No., Series name. | White marking. Negative polarity marking (stripe) on lead. |
| Performance Conditions | Temperature: +15 to +35, Humidity: 45 to 75% RH, Atmospheric pressure: 86 to 106kPa. For judgment: +202, 60 to 70% RH, 86 to 106kPa. | |
| Capacitance Measurement | Frequency: 120Hz 20%, Voltage: 0.5Vrms max. +1.5 to 2.0VDC. Circuit: Series equivalent. | Shall be within specified capacitance tolerance. |
| Dissipation Factor Measurement | Frequency: 120Hz 20%, Voltage: 0.5Vrms max. +1.5 to 2.0VDC. Circuit: Series equivalent. | Shall not exceed values specified in Standard Ratings Table. |
| Terminal Strength - Pull | Lead diameter > 0.5 to 0.8mm: 10N pull force for 101 sec. | Lead wire shall neither loosen nor break away. |
| Terminal Strength - Bending | Lead diameter > 0.5 to 0.8mm: 5N bending load. | Lead wire shall neither loosen nor break away. |
| Soldering Heat | Solder: Sn-3Ag-0.5Cu, Flux: Ethanol solution (25 wt.% rosin). Temp/Time: +2605 for 101 sec OR +38010 for 30.5 sec. Depth: 1.5 to 2.0mm. Speed: 252.5mm/sec. | No significant damage, legible marking, no electrolyte leakage. Capacitance change within 10%. Tan within initial specified value. |
| Solderability | Solder: Sn-3Ag-0.5Cu, Flux: Ethanol solution (25 wt.% rosin). Temp: +2453. Depth: 1.5 to 2.0mm. Time: 2 to 3 sec. | Solder shall cover at least 3/4 of the immersed lead surface. |
| Vibration | Frequency: 10 to 55Hz. Amplitude/Acceleration: 0.75 mm or 98m/s (whichever is less severe). Sweep: 10 to 55 to 10Hz in 1 min. Duration: 2 hours each in 3 directions (total 6 hours). | No significant damage, legible marking, no electrolyte leakage. Capacitance change within 5%. |
| Damp Heat | Temp: +402, Humidity: 90 to 95% RH. Time: 2408 hours. | No significant damage, legible marking, no electrolyte leakage. Leakage current within initial value. Capacitance change within 20%. Tan not exceed 120% of initial value. |
| Endurance | DC voltage with rated ripple current at +1052 for 12,000+72/-0 hours. Sum of DC and peak AC voltage must not exceed rated voltage. | No significant damage, legible marking, no electrolyte leakage. Leakage current within initial value. Capacitance change within 20%. Tan not exceed 200% of initial value. |
| Surge Voltage Test | Temp: +15 to +35. Resistor: 100010 . Voltage: Surge voltage (Table-1). Apply 305 sec every 60.5 min. Cycle: 1000 cycles. | No significant damage, no electrolyte leakage. Leakage current within initial value. Capacitance change within 20%. Tan not exceed 200% of initial value. |
| Pressure Relief Vent | Reverse voltage with 1 amp DC current. | Capacitor shall not flame. If vent does not operate within 30 minutes, test is passed. |
| High Temperature Storage | 1,000+48/-0 hours at +1052 without voltage. Preconditioned per JIS C 5101-4 Item 4.1. | No significant damage, legible marking, no electrolyte leakage. Leakage current within initial specified value. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina