electronic capacitor CL11-2A473J-100V polyester film type with 100 volts rating and 0.047F capacitance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CL11-2A series polyester film capacitor, manufactured by DAFU, offers reliable performance for various electronic applications. With a focus on quality and adherence to international standards, these capacitors are designed for durability and consistent operation.
Product Attributes
- Brand: (DAFU)
- Origin: (Dongguan DAFU Electronics Co., Ltd.)
- Material: Aluminum foil, film, epoxy resin, CP wire
- Certifications: ROHS
Technical Specifications
| Model | Rated Voltage (V) | Capacitance (PF/nF/F) | Tolerance | L (mm) | W1 (mm) | H1 (mm) | T1 (mm) | P0.5 (mm) | d0.05 (mm) |
|---|---|---|---|---|---|---|---|---|---|
| CL11-2A473J-100V | 100 | 0.047F (473) | J (5%) | 25 | 8.0 | 11.0 | 4.0 | 5.0 | 0.5 |
| CL11-2A104J-100V | 100 | 0.1F (104) | J (5%) | 25 | 8.0 | 12.0 | 4.5 | 5.0 | 0.5 |
| CL11-2A103J-100V | 100 | 0.01F (103) | J (5%) | 25 | 6.5 | 9.0 | 3.0 | 5.0 | 0.5 |
| CL11-2A223J-100V | 100 | 0.022F (223) | J (5%) | 25 | 7.5 | 10.5 | 4.0 | 5.0 | 0.5 |
General Performance Requirements:
| Item | Performance Requirement | Test Method |
|---|---|---|
| Reference Standard | GB6346 (IEC60384-11) | |
| Operating Temperature | -40+85 | |
| Rated Voltage | 50V, 100V, 250V, 400V, 630V, 1000V | |
| Capacitance Tolerance | J (5%), K (10%) | Capacitance and dissipation factor measured at 252, using 10.1KHz, 1.0Vrms. |
| Dissipation Factor (D.F.) | tg1.0% | |
| Test Voltage | No breakdown or arcing | 2.0 times rated voltage applied between leads, charging current 50mA max, 60 seconds without damage. |
| Insulation Resistance (I.R.) | CR0.1F, I.R.30000M; CR0.1F, I.R.15000M | UR100V, Test voltage 10V, measure after 1min charge; UR100V, Test voltage 100V, measure after 1min charge. |
| Solderability | At least 95% of the area around the leads is uniformly covered with solder, and the body has no visible damage. | Solder temperature: 2355; Immersion time: 2.00.5S; Leads immersed in molten solder at 2355, 2.00.5mm from the body, shielded by an insulating plate 1.50.5mm thick. |
| Rapid Temperature Change | Appearance: No visible damage | Capacitors should withstand five temperature cycles. Sequence: Lower working temp (30min) -> Room temp (3min) -> Upper working temp (30min) -> Room temp (3min). |
| Lead Strength | Appearance: No visible damage | Vertical force (5N) applied to each lead for 101 seconds. For lead diameter 0.5mm. |
| Bending Strength | Appearance: No visible damage | Capacitor leads subjected to a 2.5N weight, bent 90 outwards, then returned; bent 90 in the opposite direction, then returned; bending cycle 2-3 seconds. For lead diameter 0.5mm. |
| Resistance to Soldering Heat | Appearance: No visible damage; Capacitance change rate: C/C2% (1KHz) | Solder temperature: 2605; Immersion time: 101S; Leads immersed in molten solder at 2605, 2.00.5mm from the body. |
| Damp Heat (Steady State) | Appearance: No visible damage; Capacitance change rate: C/C5% (1KHz); Dissipation factor (1KHz): 0.01 or 1.2 times initial measurement (whichever is greater); Insulation resistance: >50% of initial value | Capacitors placed in a test chamber: No voltage applied; Temperature: 402; Humidity: 93(+2,-3)%RH; Duration: 21 days. Measurement after 1-2 hours at room temperature post-test. |
| Vibration | Appearance: No visible damage | Capacitor leads soldered and vibration frequency range 10-500Hz, amplitude 0.75mm. Vibration from 10Hz to 500Hz and back to 10Hz in approximately one minute. Total time six hours, three times in mutually perpendicular directions every two hours. |
| Endurance | Appearance: No visible damage; Capacitance change rate: C/C5% (1KHz); Dissipation factor (1KHz): 0.01 or 1.2 times initial measurement (whichever is greater); Insulation resistance: >50% of initial value | Capacitors at 853, with 1.5 times rated voltage applied for 1000 hours. Voltage applied through a resistor equal to 1 per volt. Measurement after 1-2 hours at room temperature post-test. |
Storage Conditions:
- Storage Temperature and Humidity: -1040, 2575RH
- Storage Time: One year
Environmental Management Control Substances:
| No. | Hazardous Substance Type | Hazardous Substance Name | Limited Content |
|---|---|---|---|
| 1 | Heavy Metals | Cadmium and its compounds | 100ppm |
| Lead and its compounds | 1000ppm | ||
| Mercury and its compounds | 1000ppm | ||
| Hexavalent chromium compounds | 1000ppm | ||
| 2 | Organic Bromides | Polybrominated biphenyls (PBB) | 1000ppm |
| Polybrominated diphenyl ethers (PBDE) including DecaBDE | 1000ppm |
Test Report: (SGS report attached)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina