High Power 3W Metal Current Sensing Resistors RVR HIXD25LR024F Suitable for Reflow and Wave Soldering
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This document specifies the approval for Metal Current Sensing Chip Resistors, Type 2512/1206/0805 series. These resistors offer high power up to 3W, low TCR down to 50ppm/, and are suitable for reflow and wave soldering. They feature Halogen Free Epoxy, Lead Free Plating, superior mechanical strength, and excellent high-frequency characteristics, complying with RoHS standards.
Product Attributes
- Brand: (Changzhou Pengke Electronics)
- Origin: China
- Material: Metal Alloy Resistance
- Certifications: RoHS compliant, Halogen Free
Technical Specifications
| Product Series | Type Designation | Power Rating | Resistance Range | TCR (ppm/) | Tolerance (%) | Operating Temperature Range | Max. Operating Voltage (V) | Insulation Resistance (M) |
| 2512 | HI XD 25 N R001 F | 2W/3W | 0m R 1m | 350 | 1, 2, 5 | -55 ~ +170 | (P*R) | > 100 |
| 1m | 100 | |||||||
| 2m | 50 | |||||||
| 1206 | HI RC 1206 L | 1W | 0m R 2m | 350 | 1, 2, 5 | -55 ~ +170 | (P*R) | > 100 |
| 2m | 50 | |||||||
| 0805 | HI RE 0805 B | 0.5W | 5m R 15m | 50 | 1, 2, 3, 5 | -55 ~ +170 | (P*R) | > 100 |
Construction and Dimension (mm)
| Series | L | W | T | A (DD/XD) |
| 2512 | 6.40.20 | 3.20.20 | 0.80.20 | DD:2.00.20 (R4 m) XD:1.00.20 (R0.5 m) |
| 1206 | 3.20.20 | 1.60.20 | 0.70.20 (0m R0.450.20 (10m| 0.60.20 | |
| 0805 | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 |
Land Pattern Dimensions (mm)
| Series | a | b | L |
| 0805 RE | 1.5 | 1 | 1 |
| 1206 RC | 1.8 | 1.7 | 1.6 |
| 2512 XD | 4 | 2.1 | 4.1 |
| 2512 DD | 4 | 3.1 | 1.3 |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Temperature coefficient (TCR) | Measured at 25(T1, R1) and 125(T2, R2) | Refer to TCR specifications for physical features |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds | > 100 M |
| Withstand voltage | Apply AC voltage of maximum overload voltage between electrode and substrate at approx. 100V/S, hold for 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2605 tin tank, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 min ~ normal temp 5 min ~155 30 min, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
Tape Packaging Dimensions (mm)
| Series | A | B | C | D | E | T1 | T2 |
| 0805 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.01 | / |
| 1206 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.00.3 | 11.4 1.0 |
| 2512 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 13.0 0.3 | 15.4 1.0 |
Reel Dimensions (mm)
| Series | D | C | E | T1 |
| 0805 | 178 | 60 | 13 | 9.0 |
| 1206 | 178 | 60 | 13 | 9.0 |
| 2512 | 178 | 60 | 13 | 13.0 |
Label Information
- Packaging Quantity: 0805/1206: 5000pcs/Reel, 2512: 4000pcs/Reel
- Marked Items: Size, Quantity, LOT.NO., Manufacturers name
Recommended Reflow Soldering Profile
- Solder: Sn96.5 / Ag3 / Cu0.5
- Peak Temperature: 240~260, 10 sec
- Pre-heating Zone: 150 to 200 , 9030 sec
- Soldering Zone: 230 or higher, 3010 sec
Care Note for Storage
- Store in a controlled environment: temperature 535, relative humidity 4575% RH. Keep humidity low.
- Avoid direct sunlight exposure.
- Do not store in humid, dusty, or environments with harmful gases (Hydrogen chloride, sulfurous acid gas, Hydrogen sulfide) that degrade solderability.
- Storage life: 1 year.
Care Note for Operating and Handling
- Avoid exceeding normal rated power, which may negatively affect performance and reliability.
- Handle with care using tweezers to avoid damaging the protective layer or resistance body.
- When manually installing, do not touch the product with the soldering tip.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina