Current Sensing Metal Alloy Resistors RVR HIXD25NR001F Featuring Halogen Free Epoxy and Lead Free Plating
Product Overview
This document outlines the Approval Specification for Metal Current Sensing Chip Resistors - Type. These resistors, available in 2512, 1206, and 0805 series, offer high power capabilities up to 3W, low TCR down to 50ppm/, and are suitable for reflow and wave soldering. They feature Halogen Free Epoxy, Lead Free Plating, superior mechanical strength, excellent high-frequency characteristics, and are RoHS compliant. Applications include current sensing where precise resistance and high power handling are critical.
Product Attributes
- Brand: Changzhou Pengke Electronics
- Origin: China
- Material: Metal Alloy Resistance
- Certifications: RoHS compliant, Halogen Free
Technical Specifications
| Series | Model | Power | Resistance Range | TCR | Tolerance | Operating Temperature | Max. Voltage |
| 2512 | DD/XD | 2W/3W | 0mR 1m: 350ppm/ 1m<R 2m: 100ppm/ 2m<R 500m: 50 ppm/ | 350ppm/, 100ppm/, 50 ppm/ | 1%, 2%, 5% | -55 ~ +170 | (P*R) |
| 1206 | RC | 1W | 0mR 2m: 350ppm/ 2m<R 200m: 50 ppm/ | 350ppm/, 50 ppm/ | 1%, 2%, 5% | -55 ~ +170 | (P*R) |
| 0805 | RE | 0.5W | 5mR 15m: 50ppm/ | 50ppm/ | 1%, 2%, 5% | -55 ~ +170 | (P*R) |
Construction and Dimension
| Series | L (mm) | W (mm) | T (mm) | A (mm) |
| 2512 | 6.40.20 | 3.20.20 | 0.80.20 | DD:2.00.20 (R4 m) XD:1.00.20 (R0.5 m) |
| 1206 | 3.20.20 | 1.60.20 | 0.70.20 | 0m R<10m: 0.60.20 10m<R 200m: 0.450.20 |
| 0805 | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 |
Land Pattern Dimensions
| Series | a (mm) | b (mm) | L (mm) |
| 0805 RE | 1.5 | 1 | 1 |
| 1206 RC | 1.8 | 1.7 | 1.6 |
| 2512 XD | 4 | 2.1 | 4.1 |
| 2512 DD | 4 | 3.1 | 1.3 |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure insulation resistance | > 100 M |
| Withstand voltage | An alternating current with an effective value of the maximum overload voltage is applied between the electrode and the substrate at a rate of approximately 100V/S, maintaining 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2605 tin tank, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test the resistance value | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test the resistance value | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 minutes ~ normal temperature 5 minutes ~155 30 minutes, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
Tape Packaging Dimensions
| Series | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | T1 (mm) | T2 (mm) |
| 0805 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.01 | / |
| 1206 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.00.3 | 11.4 1.0 |
| 2512 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 13.0 0.3 | 15.4 1.0 |
Label
Packaging Quantity: 0805/1206: 5000pcs/Reel, 2512: 4000pcs/Reel
Label Marking: Size, Quantity, LOT.NO., Manufacturers name
Recommended Reflow Soldering Profile
| Parameter | Specification |
| Solder | Sn96.5 / Ag3 / Cu0.5 |
| Peak Temperature | 240~260, 10 sec |
| Pre-heating Zone | 150 to 200 , 9030 sec |
| Soldering Zone | 230 or higher , 3010 sec |
Care Note
Storage: Temperature (535), Humidity (4575% RH). Avoid direct sunlight, moisture, dust, and harmful gases.
Storage Life: 1 year.
Handling: Avoid exceeding rated power. Handle with care to prevent damage. Do not touch product with soldering tip during manual installation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.