Chip Resistors Metal Alloy RVR HIRC12AR008F with Lead Free Plating and Excellent Mechanical Strength
Product Overview
This document details the Approval Specification for Metal Current Sensing Chip Resistors, Type 2512/1206/0805 series. These resistors offer high power capabilities up to 3W, low TCR as 50ppm/, and are suitable for reflow and wave soldering. They feature halogen-free epoxy, lead-free plating, superior mechanical strength, and excellent high-frequency characteristics, complying with RoHS standards.
Product Attributes
- Brand: (Changzhou Pengke Electronics)
- Origin: China
- Material: Metal Alloy
- Certifications: RoHS compliant, Halogen Free
Technical Specifications
| Category | Size | Rated Power | Resistance Range | TCR (ppm/) | Operating Temp. (C) | Tolerance (%) | Insulation Resistance (M) | Max. Operating Voltage (V) |
| 2512 DD/XD | 2512 | 2W/3W | 0m R 1m | 350 | -55 ~ +170 | 1, 2, 5 | > 100 | (P*R) |
| 1m | 100 | |||||||
| 2m | 50 | 1, 2, 5 | ||||||
| 1206 RC | 1206 | 1W | 0m R 2m | 350 | -55 ~ +170 | 1, 2, 5 | > 100 | (P*R) |
| 2m | 50 | 1, 2, 5 | ||||||
| 0805 RE | 0805 | 0.5W | 5m R 15m | 50 | -55 ~ +170 | 0.5, 1, 2, 3, 5 | > 100 | (P*R) |
Construction and Dimension (mm)
| Category | L | W | T | A (DD/XD) |
| 2512 | 6.40.20 | 3.20.20 | 0.80.20 | DD:2.00.20 (R4 m) XD:1.00.20 (R0.5 m) |
| 1206 | 3.20.20 | 1.60.20 | 0.70.20 (0m R0.450.20 (10m| 0.60.20 | |
| 0805 | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 |
Land Pattern Dimensions (mm)
| Category | a | b | L |
| 0805 RE | 1.5 | 1 | 1 |
| 1206 RC | 1.8 | 1.7 | 1.6 |
| 2512 XD | 4 | 2.1 | 4.1 |
| 2512 DD | 4 | 3.1 | 1.3 |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Temperature coefficient (TCR) | Measured at 25(T1, R1) and 125(T2, R2), TCR=(R2-R1)/(R1(T2-T1))*10^6 | Refer to TCR specifications for physical features |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60s, then measure insulation resistance | > 100 M |
| Withstand voltage | Apply AC voltage of max overload voltage between electrode and substrate at approx. 100V/S, maintain 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of electrode surface area covered with new solder |
| Resistance to Soldering Heat | 2605 tin tank, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 min ~ normal temp 5 min ~155 30 min, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
Tape Packaging Dimensions (mm)
| Type | A | B | C | D | E | T1 | T2 |
| 0805 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.01 | / |
| 1206 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.00.3 | 11.4 1.0 |
| 2512 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 13.0 0.3 | 15.4 1.0 |
Reel Dimensions (mm)
| Type | D | C | E | T1 |
| 0805 | 1782.0 | 601.0 | 131.0 | 9.01 |
| 1206 | 1782.0 | 601.0 | 131.0 | 9.00.3 |
| 2512 | 1782.0 | 601.0 | 131.0 | 13.0 0.3 |
Label Information
Packaging Quantity: 0805/1206: 5000pcs/Reel; 2512: 4000pcs/Reel
Label shall mark the following items:
- Size
- Quantity
- LOT.NO.
- Manufacturers name
Recommended Reflow Soldering Profile
Solder: Sn96.5 / Ag3 / Cu0.5
Peak Temperature: 240~260, 10 sec
Pre-heating Zone: 150 to 200 , 9030 sec
Soldering Zone: 230 or higher, 3010 sec
Care Note
Storage: Store in a controlled environment (temperature 5-35, humidity 45-75% RH), avoid direct sunlight, moisture, dust, and harmful gases. Storage life: 1 year.
Handling: Avoid exceeding rated power. Handle with care to prevent damage. Do not touch the product with the soldering tip during manual installation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.