Metal Current Sensing Chip Resistor RVR HIXD25NR015F with Superior Mechanical Strength and RoHS Compliance
Product Overview
This document specifies the Approval Specification for Metal Current Sensing Chip Resistors, Type HI XD. These resistors are designed for high power applications up to 3W, with low TCR values as low as 50ppm/. They are suitable for reflow and wave soldering, feature halogen-free epoxy, lead-free plating, superior mechanical strength, and excellent high-frequency characteristics. The resistors comply with RoHS standards.
Product Attributes
- Brand: (Changzhou Pengke Electronics)
- Origin: China
- Material: Metal Alloy
- Certifications: RoHS compliant, Halogen Free
Technical Specifications
| Series | Type Designation | Power | Resistance Range | TCR | Operating Temperature Range | Tolerance | Max. Operating Voltage |
| 2512 DD/XD | HI XD 25 N R001 F | 2W/3W | 0mR 1m: 350ppm/ 1m<R 2m: 100ppm/ 2m<R 500m: 50 ppm/ | -55 ~ +170 | F: 1% G: 2% J: 5% | (P*R) | |
| 1206 RC | HI XD 12 L R010 A | 1W | 0mR 2m: 350ppm/ 2m<R 200m: 50 ppm/ | -55 ~ +170 | A: 1W | (P*R) | |
| 0805 RE | HI XD 08 B R100 B | 0.5W | 5mR 15m: 50ppm/ | -55 ~ +170 | B: 0.5W | (P*R) |
Construction and Dimension
| Series | L (mm) | W (mm) | T (mm) | A (mm) | Electrode Type |
| 2512 | 6.40.20 | 3.20.20 | 0.80.20 | DD: 2.00.20 (R4 m) XD: 1.00.20 (R0.5 m) | DD: Large Electrode XD: Small Electrode |
| 1206 | 3.20.20 | 1.60.20 | 0.70.20 (0m R<10m) 0.450.20 (10m<R 200m) | 0.60.20 | RC: 1206 |
| 0805 | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 | RE: 0805 |
Land Pattern Dimensions
| Series | a (mm) | b (mm) | L (mm) |
| 0805 RE | 1.5 | 1 | 1 |
| 1206 RC | 1.8 | 1.7 | 1.6 |
| 2512 XD | 4 | 2.1 | 4.1 |
| 2512 DD | 4 | 3.1 | 1.3 |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure insulation resistance | > 100 M |
| Withstand voltage | An alternating current with an effective value of the maximum overload voltage is applied between the electrode and the substrate at a rate of approximately 100V/S, maintaining 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2605 tin tank, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test the resistance value | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test the resistance value | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 minutes ~ normal temperature 5 minutes ~155 30 minutes, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
Tape Packaging Dimensions
| Series | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | T1 (mm) | T2 (mm) |
| 0805 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.01 | / |
| 1206 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.00.3 | 11.4 1.0 |
| 2512 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 13.0 0.3 | 15.4 1.0 |
Reel Dimensions
| Series | D (mm) | C (mm) | E (mm) | T1 (mm) |
| 0805 | 1782.0 | 601.0 | 131.0 | 9.01 |
| 1206 | 1782.0 | 601.0 | 131.0 | 9.00.3 |
| 2512 | 1782.0 | 601.0 | 131.0 | 13.0 0.3 |
Label
Quantity: 0805/1206: 5000pcs/Reel, 2512: 4000pcs/Reel. Label shall mark: (1) Size, (2) Quantity, (3) LOT.NO., (4) Manufacturers name.
Recommended Reflow Soldering Profile
| Parameter | Value |
| Solder | Sn96.5 / Ag3 / Cu0.5 |
| Peak Temperature | 240~260, 10 sec |
| Pre-heating Zone | 150 to 200 , 9030 sec |
| Soldering Zone | 230 or higher, 3010 sec |
Care Note
Storage: Store in controlled temperature (535) and humidity (4575% RH). Avoid direct sunlight, moisture, dust, and harmful gases. Storage life: 1 year.
Operating and Handling: Avoid exceeding rated power. Handle with care using tweezers to prevent damage. Do not touch the product with the soldering tip during manual installation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.