Thin Layer Large Capacitance Multilayer Ceramic Capacitor SAMWHA CS1005X5R224K100NR for Communication Equipment

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Multilayer Ceramic Capacitor - Commercial Grade

This document outlines the specifications for the SAMWHA Multilayer Ceramic Capacitor, Commercial Grade, Thin Layer Large-Capacitance Type. Designed for reliability and performance, these capacitors are primarily utilized in computer and communication equipment, as well as industrial and high-reliability applications including LED equipment.

Product Attributes

Brand: SAMWHA CAPACITOR CO., LTD.
Origin: KOREA
Product Type: Multilayer Ceramic Capacitor
Grade: Commercial Grade
Type: Thin Layer Large-Capacitance Type
Model Number: CS3216X5R226K160NRI

Technical Specifications

Part Number	Type	Capacitance	Capacitance Tolerance	Dissipation Factor	Insulation Resistance	Chip Size (L x W x T)	Operating Temperature Range	Rated Voltage
CS3216X5R226K160NRI	Thin Layer Large-Capacitance	22 ㎳	±10%	Max. 12.5%	More than 2.27 MΩ	3.20 ±0.30 x 1.60 ±0.20 x 1.60 ±0.20 mm	-55 to +85℃ (X5R)	16V DC

Detailed Specifications

Item	Specification	Test Methods and Conditions
Capacitance	22 ㎳	Frequency: 120 ±24 Hz, Testing Voltage: 0.5 ±0.1 Vrms
Capacitance Tolerance	±10%
Dissipation Factor	Max. 12.5%
Insulation Resistance	More than 2.27 MΩ	Applied the rated voltage for 2 minutes of charging.
Chip Size	3.20 ±0.30 mm (L)
	1.60 ±0.20 mm (W)
	1.60 ±0.20 mm (T)
Capacitance Tolerance Code	K	±10%
Voltage Code	160	16V DC
Termination Code	N	Ni-Sn (Nickel-Tin Plate)
Packing Code	R	7" Reel Type
Thickness Option	I	1.60 mm ±0.20
Operating Temperature Range	X5R: -55 to +85℃
Insulation Resistance	50 F min Ω	Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA.
Dielectric Strength	No defects or abnormalities	Rated voltage × 250% - Applied between the terminations for 1 to 5 seconds. The charge/discharge current is less than 50mA.
Capacitance Measurement	C ≤ 10㎳: 1 ±0.1 kHz, 0.5~1.0 Vrms C > 10㎳: 120 ±24 Hz, 0.5 ±0.1 Vrms	Initial measurement according to Note1 for Class Ⅱ. Measurement after test: 24±2 hours (Class Ⅱ).
Dissipation Factor	X5R: 12.5%max
Solderability of Termination	Termination should be covered with more than 75% of new solder	*Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu, Solder temperature: 245±5℃, Immersion time: 3±0.1sec, Pre-Heating: at 80~120℃ for 10~30sec
Resistance to Soldering Heat	Appearance: No defects which may affect performance	Preheat the capacitor at 120 to 150℃ for 1 minute. Immerse the capacitor in a eutectic solder solution at 260±5℃ for 10±0.5 seconds. Initial measurement. Measurement after test: Let sit at room temperature for 24±2 hours, then measure.
Capacitance change (after soldering heat)	X5R: Within±7.5%
Dissipation Factor (after soldering heat)	X5R: 12.5%max