multilayer ceramic capacitor SAMWHA CS3216X5R226K160NRI designed for computer communication and LED applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Multilayer Ceramic Capacitor - Commercial Grade

The SAMWHA Multilayer Ceramic Capacitor (Commercial Grade, Thin Layer Large-Capacitance Type) is designed for use in computer equipment, communication equipment, industrial equipment, high reliability equipment, and LED equipment. It offers a reliable solution for various electronic applications.

Product Attributes

Brand: SAMWHA CAPACITOR CO., LTD.
Origin: KOREA
Product Type: Multilayer Ceramic Capacitor (Commercial Grade)
Model Series: CS3216X5R226K160NRI

Technical Specifications

Part No.	Type	Capacitance	Capacitance Tolerance	Dissipation Factor	Insulation Resistance	Chip Size (L x W x T)	Voltage Code	Termination Code	Packing Code
CS3216X5R226K160NRI	Thin Layer Large-Capacitance	22	10 %	Max. 12.5 %	More than 2.27	3.20 0.30 (L) x 1.60 0.20 (W) x 1.60 0.20 (T)	160 (16V DC)	N (Ni-Sn)	R (7" Reel Type)

Detailed Specifications

Item	Specification	Test Methods and Conditions
Operating Temperature Range	X7R, X7S, X7T : -55 to +125 X5R : -55 to +85 Y5V : -30 to +85
Insulation Resistance	50 G min	Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA.
Dielectric Strength	No defects or abnormalities	X7R, X7S, X7T, X5R, Y5V : The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA.
Capacitance	C 10 : 1 0.1kHz, 0.5~1.0Vrms C > 10 : 120 24Hz, 0.50.1Vrms	Initial measurement Perform the initial measurement according to Note1 for Class Measurement after test Take it out and set it for 242 hours (Class ) then measure
Dissipation Factor	X7R, X7S, X7T, X5R : 12.5%max *3216 Size 100 : 15% max Y5V : 20%max
Solderability of Termination	Termination should be covered with more than 75% of new solder	Pb-Free type Solder : 96.5Sn-3Ag-0.5Cu Solder temperature : 2455 Immersion time : 30.1sec Pre-Heating : at 80~120 for 10~30sec
Resistance to Soldering Heat	Appearance No defects which may affect performance	Preheat the capacitor at 120 to 150 for 1 minute. (Preheating for 3225,4520,4532 Step1:100 to 120, 1min Step2:170 to 200, 1min) Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds. Initial measurement Measurement after test Let sit at room temperature for 242 hours,then measure. Capacitance change X7R, X7S, X7T, X5R : Within7.5% Y5V : Within20% Dissipation Fact