Multilayer Ceramic Capacitor for High Reliability Equipment SAMWHA CS2012X5R475K500NRE Commercial Grade

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The SAMWHA EURODRIVE NO. M190108 is a Multilayer Ceramic Capacitor, Commercial Grade, Thin Layer Large-Capacitance Type. It is designed for use in computer equipment, communication equipment, industrial equipment, high reliability equipment, LED equipment, and other applications.

Product Attributes

Brand: EURODRIVE
Manufacturer: SAMWHA CAPACITOR CO., LTD.
Origin: KOREA
Model Number: M190108
Part Number: CS2012X5R225K500NRE

Technical Specifications

Item	Specification	Unit	Test Methods and Conditions
Capacitance	2.2		Frequency: 1 0.1kHz, Testing Voltage: 1 0.2Vrms
Capacitance Tolerance	10	%
Dissipation Factor	Max. 12.5	%
Insulation Resistance	More than 22.7		Applied the rated voltage for 2 minutes of charging.
Chip Size (L)	2.00 0.20
Chip Size (W)	1.25 0.15
Chip Size (T)	1.25 0.15
Type Designation	CS2012X5R225K500NRE		(1) Multilayer Ceramic Capacitor (Commercial Grade) (2) Size Code: 2012 (Length 2.0mm, Width 1.25mm) (3) Temperature Coefficient Code: X5R (-55 to +85, 15%) (4) Capacitance Code: 225 (2.2F) (5) Capacitance Tolerance Code: K (10%) (6) Voltage Code: 500 (50V DC) (7) Termination Code: N (Ni-Sn) (8) Packing Code: R (7" Reel Type) (9) Thickness option: Not specified in this section.
Operating Temperature Range	X5R: -55 to +85
Insulation Resistance	50 F min		Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA.
Dielectric Strength	No defects or abnormalities		X5R: The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA.
Capacitance	Within the specified tolerance		Capacitance/D.F. measured at 25. Capacitance: C 10F: 1 0.1kHz, 0.5~1.0Vrms; C > 10F: 120 24Hz, 0.50.1Vrms. Perform initial measurement and measurement after 242 hours.
Dissipation Factor	12.5%max	%	For X5R
Solderability of Termination	Termination should be covered with more than 75% of new solder		Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu Solder temperature: 2455 Immersion time: 30.1sec Pre-Heating: at 80~120 for 10~30sec
Resistance to Soldering Heat	Appearance No defects which may affect performance		Preheat the capacitor at 120 to 150 for 1 minute. Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds. Perform initial measurement and measurement after 242 hours at room temperature.
Capacitance change	X5R