Multilayer Ceramic Capacitor Commercial Grade SAMWHA CS1005X7R104K500NR Thin Layer Large Capacitance for Industrial

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Multilayer Ceramic Capacitor - Commercial Grade

This document details the specifications for the SAMWHA CAPACITOR CO., LTD. Multilayer Ceramic Capacitor, Commercial Grade, Thin Layer Large-Capacitance Type. These capacitors are primarily designed for use in computer equipment and communication equipment, with potential applications in industrial equipment, high reliability equipment, and LED equipment.

Product Attributes

Brand: SAMWHA CAPACITOR CO., LTD.
Origin: KOREA
Model Number: CS3216X7R475K500NRI
Type: Thin Layer Large-Capacitance
Grade: Commercial Grade

Technical Specifications

Part No.	Type	Capacitance	Capacitance Tolerance	Dissipation Factor	Insulation Resistance	Chip Size (L x W x T)	Temperature Coefficient	Rated Voltage
CS3216X7R475K500NRI	Thin Layer Large-Capacitance	4.7	10 %	Max. 12.5 %	More than 10.6	3.20 0.30 mm x 1.60 0.20 mm x 1.60 0.20 mm	X7R (-55 to +125)	50V DC

Detailed Specifications & Test Methods

Item	Specification	Test Methods and Conditions
Operating Temperature Range	X7R: -55 to +125
Insulation Resistance	50 F min	Applied the rated voltage for 2 minutes of charging. The charge/discharge current is less than 50mA.
Dielectric Strength	No defects or abnormalities	The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA.
Capacitance	Within the specified tolerance	Measured at 25 at the frequency and voltage shown in the table. Capacitance Frequency Voltage C 10 1 0.1kHz 0.5~1.0Vrms C>10 120 24Hz 0.50.1Vrms
Dissipation Factor	X7R: 12.5%max
Solderability of Termination	Termination should be covered with more than 75% of new solder	Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu Solder temperature: 2455 Immersion time: 30.1sec Pre-Heating: at 80~120 for 10~30sec
Resistance to Soldering Heat	Appearance: No defects which may affect performance	Preheat the capacitor at 120 to 150 for 1 minute. Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds.