Monolithic Multilayer Ceramic Capacitor Thin Layer Large Capacitance SAMWHA CS1608X7R474K250NRB for Industrial Equipment

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document details the specifications for the MONOLITHIC MULTILAYER CERAMIC CAPACITOR (Thin Layer Large-Capacitance Type) from SAMWHA CAPACITOR CO., LTD. These capacitors are designed for use in computer equipment, communication equipment, industrial equipment, high reliability equipment, and LED equipment.

Product Attributes

Brand: SAMWHA CAPACITOR CO., LTD.
Origin: KOREA
Product Type: Monolithic Multilayer Ceramic Capacitor (Thin Layer Large-Capacitance Type)
Model Number: CS1608X7R105K250NRB
Date of Approval: 2017. 12. 22.
Standard: SW - M - 04B

Technical Specifications

Item	Specification	Unit	Test Methods and Conditions
Capacitance	1		Frequency: 1 0.1kHz, Testing Voltage: 1 0.2Vrms
Capacitance Tolerance	10	%
Dissipation Factor	Max. 12.5	%
Insulation Resistance	More than 50		Applied the rated voltage for 2 minutes of charging.
Chip Size (L)	1.60 0.15
Chip Size (W)	0.80 0.10
Chip Size (T)	0.80 0.10
Operating Temperature Range (X7R)	-55 to +125
Operating Temperature Range (X5R)	-55 to +85
Operating Temperature Range (Y5V)	-30 to +85
Insulation Resistance	50 F min		Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA.
Dielectric Strength (X7R, X5R, Y5V)	The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA.
Capacitance Measurement (C 10)	1 0.1kHz, 0.5~1.0Vrms		Initial measurement Perform the initial measurement according to Note1 for Class . Measurement after test Take it out and set it for 242 hours (Class ) then measure.
Capacitance Measurement (C > 10)	120 24Hz, 0.50.1Vrms		Initial measurement Perform the initial measurement according to Note1 for Class . Measurement after test Take it out and set it for 242 hours (Class ) then measure.
Dissipation Factor (X7R, X5R)	12.5%max
Dissipation Factor (*3216 Size 100 max)	15% max
Dissipation Factor (Y5V)	20%max
Solderability of Termination	Termination should be covered with more than 75% of new solder		Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu Solder temperature: 2455 Immersion time: 30.1sec Pre-Heating: at 80~120 for 10~30sec
Resistance to Soldering Heat (Appearance)	No marking defects		Preheat the capacitor at 120 to 150 for 1 minute. (Preheating for 3225,4520,4532 Step1:100 to 120, 1min Step2:170 to 200, 1min) Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds. Initial measurement Perform the initial measurement according to Note1 for Class Measurement after test Let sit at room temperature for 242 hours,then measure. Capacitance change