Epoxy Molded MEMS Oscillator SJK 2NM12000C33YC 12 MHz 2.5x2.0mm Surface Mount Package LVCMOS Output
Si MEMS Oscillator Series 2NM
Product Overview
The Si MEMS Oscillator Series 2NM is a surface mountable oscillator designed with epoxy molding and a 2.5x2.0mm package. It offers a nominal frequency of 12.000MHz and operates within a supply voltage range of 1.8V to 3.3V. This series is suitable for applications requiring stable frequency output and features an LVCMOS output. The oscillator utilizes an AT CUT crystal cutting type and supports an enable control function.
Product Attributes
- Brand: SJK ()
- Series: 2NM
- Package Type: 2.5x2.0mm Surface Mount
- Molding: Epoxy
- Output Type: LVCMOS
- Crystal Cutting Type: AT CUT (thickness shear mode)
- Environmental Attributes: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 3000pcs/reel
Technical Specifications
| Parameter | Symbol | Min | Type | Max | Units | Notes |
|---|---|---|---|---|---|---|
| Nominal Frequency | 12.000000 | MHz | ||||
| Frequency Stability AT 25 | 10 | PPM | ||||
| Frequency Stability Over Operating Temperature range | 15 | PPM | ||||
| Operating Temperature | Topr | -40 | 25 | 85 | ||
| Storage Temperature | Tstg | -55 | 125 | |||
| Supply Voltage | VDD | 3.3 10% | V | (1.62~3.63V) | ||
| Input Current | Icc | 10 | mA | |||
| Enable Control | Yes | Pad1 | ||||
| Output Load: CMOS | CL | 15 | pF | |||
| Output Voltage High | VoH | 90% | Vdd | V | ||
| Output Voltage Low | VoL | 10% | Vdd | V | ||
| Rise Time | Tr | 5 | ns | 10%90%VDD Level | ||
| Fall Time | Tf | 5 | ns | 90%10%VDD Level | ||
| Symmetry (Duty ratio) | TH/T | 45 | ~ 55 | % | ||
| Start-up Time | Tosc | 10 | ms | |||
| Enable Voltage High | Vhi | 70% | Vdd | V | ||
| Disable Voltage Low | Vlo | 30% | Vdd | V | ||
| Aging (1st. Year at 25) | 3 | ppm/yr. | ||||
| Output Disable Delay Time | T off | 150 | us | |||
| Output Enable Delay Time | T on | 150 | us | |||
| Phase Jitter (12KHZ~20MHZ) | 0.5 | ~ 1.0 | ps |
Dimensions
(Units :mm)
Dimensions are provided in the original document but not extracted here due to lack of explicit table format.
Marking
Marking details are provided in the original document but not extracted here due to lack of explicit table format.
Test Circuit
Control input (output enable/disable): Logic 1 or open on pad 1: Oscillator output. Logic 0 on pad 1: Disable output to high impedance.
Waveform Conditions
Waveform measurement system should have a min. bandwidth of 5 times the frequency being tested.
Output Enable / Disable Delay
The oscillator timing during normal operation is shown in the original document. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Suggested Reflow Profile
Total time: 200 sec. Max / Solder melting point: 220
Reliability Test Specification
1. Mechanical Endurance
| No. | Test Item | Test Methods REF. DOC |
|---|---|---|
| 1 | Drop Test | 75 cm height, 3 times on concrete floor. JIS C6701 |
| 2 | Mechanical Shock | Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time MIL-STD-202F |
| 3 | Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes. Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs) MIL-STD-883E |
| 4 | Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2 MIL-STD-883E |
| 5 | Fine Leak | Helium Bomging 4.5 kgf / cm 2 for 2 Hrs |
| 6 | Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds. Flux Rosin resin methyl alcohol solvent (1 : 4) MIL-STD-883E |
2. Environmental Endurance
| No. | Test Item | Test Methods REF. DOC |
|---|---|---|
| 1 | Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec. Test temperature 260 5 , Test time 10 1 sec. MIL-STD-202F |
| 2 | High Temp. Storage | + 125 3 for 1000 12 Hrs MIL-STD-883E |
| 3 | Low Temp. Storage | - 40 3 for 1000 12Hrs MIL-STD-883E |
| 4 | Thermal Shock | Total 100 cycles of the following temperature cycle MIL-STD-883E |
| 5 | Pressure Cooker Storage | 121 3 , RH100% , 2 bar , 240Hrs JIS C6701 |
| 6 | High TempHumidity | 85 3, RH 85% , 1000Hrs JIS C5023 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.