Surface Mount Oscillator Epoxy Molding Package 2.5x2.0mm SJK 2NM11289AC33YC Nominal Frequency 11.2896MHz
Product Overview
The Si MEMS Oscillator Series 2NM is a surface mount device featuring epoxy molding in a 2.5x2.0mm package. Designed for reliable performance, this oscillator series offers a nominal frequency of 11.2896MHz and operates within a voltage range of 1.8V to 3.3V, with an operating temperature range of -40C to 85C. It utilizes LVCMOS output logic and is suitable for various electronic applications requiring stable frequency generation.
Product Attributes
- Brand: SJK
- Origin: China ()
- Packaging: Epoxy Molding
- Package Type: Surface Mount
- Package Size: 2.5x2.0mm
- Certifications: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 3000pcs/reel
Technical Specifications
| Parameter | Symbol | Min | Type | Max | Units | Notes |
|---|---|---|---|---|---|---|
| Nominal Frequency | 11.289600 | MHZ | ||||
| Frequency Stability AT 25 | 10 | PPM | ||||
| Frequency Stability Over Operating Temperature range | 15 | PPM | ||||
| Operating Temperature | Topr | -40 | 25 | 85 | ||
| Storage Temperature | Tstg | -55 | 125 | |||
| Supply Voltage | VDD | 3.3 10% | V | 1.62~3.63V | ||
| Input Current | Icc | 10 | mA | |||
| Enable Control | Yes | Pad1 | ||||
| Output Load: CMOS | CL | 15 | pF | |||
| Output Voltage High | VoH | 90% Vdd | V | |||
| Output Voltage Low | VoL | 10% Vdd | V | |||
| Rise Time | Tr | 5 | ns | 10%90%VDD Level | ||
| Fall Time | Tf | 5 | ns | 90%10%VDD Level | ||
| Symmetry (Duty ratio) | TH/T | 45 | ~ 55 | % | ||
| Start-up Time | Tosc | 10 | ms | |||
| Enable Voltage High | Vhi | 70% Vdd | V | |||
| Disable Voltage Low | Vlo | 30% Vdd | V | |||
| Aging | 3 | ppm/yr. | 1st. Year at 25 | |||
| Output Disable Delay Time | T off | 150 | us | |||
| Output Enable Delay Time | T on | 150 | us | |||
| Phase Jitter (12KHZ~20MHZ) | 0.5 | ~ 1.0 | ps |
Dimensions
(Units :mm)
Dimensions are not explicitly provided in a diagram or table, only the unit of measurement is mentioned.
Marking
Marking details are not provided in the input text.
Test Circuit
Control input (output enable/disable): Logic 1 or open on pad 1: Oscillator output. Logic 0 on pad 1: Disable output to high impedance.
Waveform Conditions
Waveform measurement system should have a minimum bandwidth of 5 times the frequency being tested.
Output Enable / Disable Delay
The oscillator timing during normal operation is shown in the figures. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Suggested Reflow Profile
Total time: 200 sec. Max / Solder melting point: 220
Reliability Test Specification
Mechanical Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Drop Test | 75 cm height, 3 times on concrete floor. | JIS C6701 |
| 2 | Mechanical Shock | Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time | MIL-STD-202F |
| 3 | Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes, Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs) | MIL-STD-883E |
| 4 | Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2 | MIL-STD-883E |
| 5 | Fine Leak | Helium Bomging 4.5 kgf / cm 2 for 2 Hrs | |
| 6 | Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds, Flux Rosin resin methyl alcohol solvent (1 : 4) | MIL-STD-883E |
Environmental Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec., Test temperature 260 5 , Test time 10 1 sec. | MIL-STD-202F |
| 2 | High Temp. Storage | + 125 3 for 1000 12Hrs | MIL-STD-883E |
| 3 | Low Temp. Storage | - 40 3 for 1000 12Hrs | MIL-STD-883E |
| 4 | Thermal Shock | Total 100 cycles of the following temperature cycle | MIL-STD-883E |
| 5 | Pressure Cooker Storage | 121 3 , RH100% , 2 bar , 240Hrs | JIS C6701 |
| 6 | High TempHumidity | 85 3, RH 85% , 1000Hrs | JIS C5023 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.