frequency generation device SJK 3NM50000C33YC featuring Si MEMS technology and 3.2x25mm package size
Product Overview
The 3NM Si MEMS Oscillator Series offers a reliable and compact surface mount solution for frequency generation. Encased in an epoxy molding with a 3.2x2.5mm package, these oscillators are designed for a wide operating temperature range and feature LVCMOS output. They are suitable for various applications requiring stable frequency output, with options for enable/disable control.
Product Attributes
- Brand: SJK
- Series: 3NM
- Technology: Si MEMS
- Packaging: Epoxy Molding, Surface Mount
- Package Size: 3.2x2.5mm
- Output Type: LVCMOS
- Crystal Cutting Type: AT CUT (thickness shear mode)
- Environmental Compliance: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 3000pcs/reel
Technical Specifications
| Symbol | Parameter | Min | Typical | Max | Units | Notes |
|---|---|---|---|---|---|---|
| Nominal Frequency | 50.000000 | MHz | ||||
| Frequency Stability @ 25 | 10 | PPM | ||||
| Frequency Stability Over Operating Temperature range | 15 | PPM | ||||
| Topr | Operating Temperature | -40 | 25 | 85 | ||
| Tstg | Storage Temperature | -55 | 125 | |||
| VDD | Supply Voltage | 1.62 | 3.3 | 3.63 | V | 10% |
| Icc | Input Current | 10 | mA | |||
| Enable Control | Yes | Pad1 | ||||
| CL | Output Load: CMOS | 15 | pF | |||
| VoH | Output Voltage High | 90% | Vdd | V | ||
| VoL | Output Voltage Low | 10% | Vdd | V | ||
| Tr | Rise Time | 5 | ns | 10%90%VDD Level | ||
| Tf | Fall Time | 5 | ns | 90%10%VDD Level | ||
| TH/T | Symmetry (Duty ratio) | 45 | 55 | % | ||
| Tosc | Start-up Time | 10 | ms | |||
| Vhi | Enable Voltage High | 70% | Vdd | V | ||
| Vlo | Disable Voltage Low | 30% | Vdd | V | ||
| Aging (1st Year at 25) | 3 | ppm/yr. | ||||
| T off | Output Disable Delay Time | 150 | us | |||
| T on | Output Enable Delay Time | 150 | us | |||
| Phase Jitter (12KHz~20MHz) | 0.5 | 1.0 | ps |
Dimensions: 3.2x2.5mm (Units: mm)
Standard Atmospheric Conditions for Measurement: Ambient temperature: 255, Relative humidity: 40%~70%
Measurement Limits: Ambient temperature: 253, Relative humidity: 40%~70%
Measurement Equipment: MD 37WX-05M or equivalent
Test Circuit: Control input (output enable/disable) Logic 1 or open on pad 1: Oscillator output. Logic 0 on pad 1: Disable output to high impedance.
Waveform Conditions: Waveform measurement system should have a min. bandwidth of 5 times the frequency being tested.
Output Enable/Disable Delay: Timing during normal operation. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Suggested Reflow Profile: Total time: 200 sec. Max / Solder melting point: 220
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.