Common Mode Choke Coil SRCM.4532.102TT00 Featuring Copper Wire and Ni-Zn Ferrite Core for Electrical

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document is a sample approval form for the SRCM.4532.Series Common Mode Choke Coils from Shenzhen Sorvida Electronics Co., Ltd. It details the product's physical dimensions, material composition, schematic, testing conditions, electrical characteristics, packaging specifications, and reliability test results. This product is designed for general use and requires customer approval before order placement.

Product Attributes

Brand: Sorvida ()
Origin: Shenzhen, China
Product Name: Common Mode Choke Coil ()
Series: SRCM.4532.Series

Technical Specifications

Part Number	Impedance (Ω)±25%	Test Freq. (MHz)	DCR Max. (Ω)	Rated Voltage Vdc (max.)	Irms (mA)(max.)	IR (Ω) min.	Dimensions (mm) A	Dimensions (mm) B	Dimensions (mm) C	Dimensions (mm) D	Dimensions (mm) E	Core Material	Wire Material	Solder Material
SRCM.4532.800TT00	80	100	0.05	50	3000	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.900TT00	90	100	0.05	50	3000	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.121TT00	120	100	0.10	50	3000	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.221TT00	220	100	0.10	50	1300	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.231TT00	230	100	0.10	50	1300	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.601TT00	600	100	0.12	50	1500	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.801TT00	800	100	0.16	50	1000	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.102TT00	1000	100	0.18	50	1200	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu
SRCM.4532.142TT00	1400	100	0.20	50	700	10	4.5±0.2	3.2±0.2	2.8±0.2	1.0Typ	1.2Typ	Ni-Zn Ferrite	Copper Wire P180-G1	Sn-0.7Cu

Reliability Test Specifications

Item	Specifications	Test Methods
Solder- Ability	More than 90% of termination should be covered with new solder.	Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.5±0.5s
Leaching Resistance	More than 75% of termination Should be covered with new solder.	Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 10±0.5s
Drop	No mechanical damage shall be noticed Impedance shall be within ±20% of the initial value	Drop 10 times on a concrete floor from a height of 1m.
Vibration	-	Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each.
Humidity resistance	a. Test condition: Temp. 40±5, Humidity: 90%~95%, Test time: 500±12hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-
High temperature resistance	a. Test condition: Applied rated current, Temp. 85±5, Test time: 500±12hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-
Low temperature resistance	No mechanical damage shall be noticed Impedance shall be within ±20% of the initial value	a. Test condition: Temp. -40±5, Test time: 500±12hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.
Thermal shock	a. Test condition: 1) Temp. -40, time: 30±3min 2) Temp. +85, time: 30±3min, 100 cycles b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-