Common Mode Choke SOREDE SBCM.7060.YF101TT00 with 140 Ohm Typical Impedance and 25 Percent Tolerance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This document outlines the specifications for the SBCM.7060.YF series common mode chokes. This product is designed for noise suppression applications, offering various impedance values and sealing options. It adheres to strict quality standards and reliability testing.
Product Attributes
- Brand: Sorede ()
- Origin: Shenzhen, China
- Certifications: UL (for wire material)
Technical Specifications
| Part Number | Impedance (@100MHz) Min | Impedance (@100MHz) Typ | DCR (m) max. | Rated Current (A)Max | Rated Volt. (Vdc)max | IR (M) min. | MARK | Dimensions (mm) | Sealing Way | Impedance Tolerance | Package |
| SBCM.7060.YF400TT00 | 40 | 70 | 5 | 15 | 125 | 10 | 400 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF101TT00 | 100 | 140 | 10 | 9 | 125 | 10 | 101 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF301TT00 | 225 | 300 | 10 | 5 | 125 | 10 | 301 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF501TT00 | 275 | 450 | 10 | 5 | 125 | 10 | 501 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF601TT00 | 500 | 700 | 15 | 4 | 125 | 10 | 601 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF701TT00 | 500 | 700 | 15 | 4 | 125 | 10 | 701 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF102TT00 | 800 | 1020 | 17 | 3 | 125 | 10 | 102 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF132TT00 | 910 | 1300 | 21 | 2.5 | 125 | 10 | 132 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF272TT00 | 2000 | 2700 | 63 | 1 | 125 | 10 | 272 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
| SBCM.7060.YF302TT00 | 2500 | 3000 | 75 | 0.9 | 125 | 10 | 302 | 7.00.5 x 6.00.5 x 3.8Max | Heat seal | 25% | Tape/Reel |
Reliability Test
| Item | Specifications | Test Methods |
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature:270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| High temperature resistance | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| Low temperature resistance | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
| Thermal shock | - | a. Test condition: 1) Temp. -40, time: 303min; 2) Temp. +85, time: 303min; 100 cycles. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
Notes
- Operating temperature range: -40 to +125 (Including Self-heating)
- Storage temperature range: -40 to +125
- Impedance measure condition at 100MHz, 0.5V.
- Rated current: the value of DC current when the temperature rise is T40 (Ta=25).
- Recommended storage conditions: 10 ~ +40, 30~70%RH.
- For storage over six months, solderability shall be checked before actual usage.
- It is recommended to use the product within 8 months from the time of delivery.
- This Specification Approval should be sent back to the supplier with customer's chop on it within 30 days after receiving it, or it will be considered approved by the customer automatically.
- In case of special specifications, please contact the technical department prior staff.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina