Electrical Noise Suppression SOREDE SBCM7060YF701T Common Mode Choke Featuring 700 Typical Impedance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document specifies the SBCM.7060.YF series common mode choke, designed for noise suppression applications. It details the product's construction, electrical characteristics, packaging, and reliability test standards.

Product Attributes

Brand: Sorede ()
Origin: Shenzhen, China
Certifications: UL FILE NO. NA (for core and case materials)

Technical Specifications

Part Number	Impedance (@100MHz) Min	Impedance (@100MHz) Typ	DCR (m) max.	Rated Current (A)Max	Rated Volt. (Vdc)max	IR (M) min.	MARK
SBCM.7060.YF400TT00	40	70	5	15	125	10	400
SBCM.7060.YF101TT00	100	140	10	9	125	10	101
SBCM.7060.YF301TT00	225	300	10	5	125	10	301
SBCM.7060.YF501TT00	275	450	10	5	125	10	501
SBCM.7060.YF601TT00	500	700	15	4	125	10	601
SBCM.7060.YF701TT00	500	700	15	4	125	10	701
SBCM.7060.YF102TT00	800	1020	17	3	125	10	102
SBCM.7060.YF132TT00	910	1300	21	2.5	125	10	132
SBCM.7060.YF272TT00	2000	2700	63	1	125	10	272
SBCM.7060.YF302TT00	2500	3000	75	0.9	125	10	302

Item	Specifications	Test Methods
Solder- Ability	More than 90% of termination should be covered with new solder.	Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s
Leaching Resistance	More than 75% of termination Should be covered with new solder.	Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s
Drop	No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value	Drop 10 times on a concrete floor from a height of 1m.
Vibration	N/A	Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each.
Humidity resistance	N/A	Temp.: 405, Humidity: 90%~95%, Test time: 50012hr. Measurement after 24 hours stabilization.
High temperature resistance	N/A	Applied rated current, Temp.: 855, Test time: 50012hr. Measurement after 24 hours stabilization.
Low temperature resistance	No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value	Temp.: -405, Test time: 50012hr. Measurement after 24 hours stabilization.
Thermal shock	N/A	-40 (303min) to +85 (303min), 100 cycles. Measurement after 24 hours stabilization.