Electrical Noise Filter SOREDE SBCM.7060.YF132TT00 Common Mode Choke Rated Current Voltage Impedance
Product Overview
This document outlines the specifications for the SBCM.7060.YF series common mode chokes. It details product identification, dimensions, material composition, electrical characteristics, packaging, and reliability testing. This product is designed for applications requiring effective noise suppression.
Product Attributes
- Brand: Sorede ()
- Origin: Shenzhen, China
- Certifications: UL (for wire material)
Technical Specifications
| Part Number | Impedance (@100MHz) Min | Impedance (@100MHz) Typ | DCR (m) max. | Rated Current (A) Max | Rated Volt. (Vdc) max | IR (M) min. | MARK | Series Name | Product Dimensions | Sealing Way | Lettering Direction | Impedance Value | Impedance Tolerance | Package | Numbering |
| SBCM.7060.YF400TT00 | 40 | 70 | 5 | 15 | 400 | 10 | 400 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF101TT00 | 100 | 140 | 10 | 9 | 101 | 10 | 101 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF301TT00 | 225 | 300 | 10 | 5 | 301 | 10 | 301 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF501TT00 | 275 | 450 | 10 | 5 | 501 | 10 | 501 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF601TT00 | 500 | 700 | 15 | 4 | 601 | 10 | 601 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF701TT00 | 500 | 700 | 15 | 4 | 701 | 10 | 701 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 900 (90) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF102TT00 | 800 | 1020 | 17 | 3 | 102 | 10 | 102 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 102 (1000) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF132TT00 | 910 | 1300 | 21 | 2.5 | 132 | 10 | 132 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 102 (1000) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF272TT00 | 2000 | 2700 | 63 | 1 | 272 | 10 | 272 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 102 (1000) | 25% | T (Tape/Reel) | Standard |
| SBCM.7060.YF302TT00 | 2500 | 3000 | 75 | 0.9 | 302 | 10 | 302 | SBCM.7060.YF | 7.00.5 | Y (Heat seal) | T | 102 (1000) | 25% | T (Tape/Reel) | Standard |
Material List
| NO. | PARTS | MATERIAL | SPECIFICATIONS | UL FILE NO. | TEMP. CLASS |
| 1 | CORE | FERRITE | FENGYIN OR EQ | NA | NA |
| 2 | WIRE | P180 Grd1 | ELEKTRISOL A OR EQ | NA | 180 |
| 3 | CASE | LCP | LIAN CHENG OR EQ | NA | NA |
| 4 | ADHESIVE | EPOXY RESIN | NAGASE OR EQ | NA | NA |
| 5 | SOLDER | Sn99.3:Cu0.7 | SHENMAO OR EQ | NA | NA |
Packaging
| Project | Quantity (PCS) | Size (mm) |
| Reel | 1500 | 13 |
| Inner box | 4500 | 340mm*340mm*65mm |
| Out box | 13500 | 360mm*360mm*225mm |
Reliability Test
| Item | Specifications | Test Methods |
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature:270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value. | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| High temperature resistance | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| Low temperature resistance | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value. | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
| Thermal shock | - | a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
Notes
General Quality: This product specification guarantees the quality of our product as a single unit. Please ensure your product is evaluated and confirmed against your specifications when our product is mounted to your product.
Usage Deviation: We cannot warrant against failure caused by any use of our product that deviates from the intended use as described in this product specification.
Storage Conditions: To maintain solderability and packing material integrity, control temperature and humidity in the storage area. Recommended conditions: 10 ~ +40, 30~70%RH. For storage over six months, solderability shall be checked before actual usage. Product weldability decreases over time; it is recommended to use within 8 months from the date of delivery.
Approval: The Specification Approval should be returned with the customer's chop within 30 days of receipt; otherwise, it will be considered approved by default.
Special Requirements: For special specifications, please contact our technical department.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.