Electrical Component Sorede SBCM.9070.YF102TT00 Common Mode Choke with UL Certified Wire Material

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document specifies the Sorede SBCM.9070.YF series common mode chokes. It details the product structure, electrical characteristics, material list, packaging, and reliability test results. This product is designed for applications requiring effective noise suppression.

Product Attributes

Brand: Sorede
Origin: Shenzhen, China
Certifications: UL File No. (for wire material)

Technical Specifications

Part Number	Impedance (@100MHz) Min	Impedance (@100MHz) Typ	DCR (m) max.	Rated Current (A)Max	Rated Volt. (Vdc)max	IR (M) min.	MARK
SBCM.9070.YF301TT00	225	300	6	6	80	10	301
SBCM.9070.YF501TT00	450	600	8	5.5	80	10	501
SBCM.9070.YF701TT00	500	700	10	5	80	10	701
SBCM.9070.YF102TT00	750	1000	13	4	80	10	102
SBCM.9070.YF222TT00	1700	2200	50	3	80	10	222
SBCM.9070.YF272TT00	2000	2700	80	2	80	10	272
SBCM.9070.YF302TT00	2500	3000	80	2	80	10	302

Item	Specifications	Test Methods
Solder- Ability	More than 90% of termination should be covered with new solder.	Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s
Leaching Resistance	More than 75% of termination Should be covered with new solder.	Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s
Drop	No mechanical damage shall be noticed Impedance shall be within 20% of the initial value	Drop 10 times on a concrete floor from a height of 1m.
Vibration	-	Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each.
Humidity resistance	a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-
High temperature resistance	a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-
Low temperature resistance	No mechanical damage shall be noticed Impedance shall be within 20% of the initial value	a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.
Thermal shock	a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.	-