Single Turn Cermet Trimmer TOCOS GF063P1-B103K with Precise Resistance Range and RoHS Certification

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The GF063 Series Single-Turn Cermet Trimmers are non-contact angle sensors designed for industrial and consumer equipment. They offer a wide variety of models with excellent performance and high reliability due to their precious metal, multi-contact wiper design. The cross-slot design allows for automatic machine adjustment, and the sealed construction enables immersion cleaning with various agents. The large diameter shaft is compatible with commercially available adjustment drivers.

Product Attributes

Brand: Not specified
Origin: Not specified
Material: Cermet
Color: Not specified
Certifications: RoHS compliant

Technical Specifications

Series	Nominal Resistance Range	Total Resistance Tolerance	End Resistance	Resistance Taper	Contact Resistance Variation	Power Rating	Max. Input Voltage	Temp. Coefficient	Insulation Resistance	Dielectric Strength	Electrical Angle	Mechanical Angle	Rotational Life	Soldering Heat Resistance
GF063 Series	10 to 2M	20% (10%)	1% or 1 , whichever is greater	B (Linear)	1% or 1 , whichever is greater	0.5W / 70, 0W / 125	DC 250V or power rating, whichever is smaller	100ppm/	1,000M min. (DC 500V)	AC 900V 1 minute	220 10	250 10	100 cycles	350 3 sec.

Environmental Characteristics

Test Item	Test Conditions	Standard
Load life	70 0.5W 1,000 hours	R/R 3% S.S. 2%
Thermal shock	-55, +125 (30 minutes) 5 cycles	R/R 1% S.S. 1%
Vibration	10Hz to 2kHz Amplitude 1.5mm (196m/s) 12 hr.	R/R 1% S.S. 1%
Shock	981m/s 6msec. 6 directions for 3 times each	R/R 1% S.S. 1%
Low temperature exposure	-55, 0.5W 2hr.	R/R 2% S.S. 2%
High temperature exposure	+125, 250 hr.	R/R 2% S.S. 2%
Moisture and load life	+40, 90 to 95%RH 0.5W 500 hr.	R/R 3% S.S. 2%
Moisture resistance	-10 to +65 (90 to 95%RH) 0.5W 240 hr.	R/R 2%
Seal test	+85 hot water 1 minute	3 bubbles max.
Solvent resistance	IPA etc. Alternative CFC, IPA etc.	Washable

Mechanical Characteristics

Test Item	Standard
Shaft torque	0.98 to 19.6mNm (10 to 200gfcm)
Stop strength	49.0mNm min. (500gfcm min.)
Operating temp. range	-55 to +125
Terminal strength	Tensile strength 9.8N min. (1kgf min.) / Bend strength 90 3 times min.
Shaft strength	Push strength 9.8N (1kgf min.)
Weight	0.41g max.: P1, P, W, U 0.52g max.: X, X1, S, S1, V