Precision High Voltage Chip Resistor TT Electronics LHVC1206-2MFT5 with 200 ppm per Degree Celsius TCR
Product Overview
The LHVC Series Lower Range High Voltage Chip Resistors offer superior voltage performance compared to commercial range chips. Available in 0805, 1206, and 2010 sizes, these resistors cater to a resistance range from 50 kOhms to 10 MOhms and are RoHS compliant.
Product Attributes
- Brand: Welwyn Components
- Certifications: RoHS compliant
Technical Specifications
| Type | Power rating at 70C (watts) | Resistance range (ohms) | Limiting element voltage DC (volts) | 5s Overload voltage DC (volts) | Dielectric withstand voltage (volts) | TCR (ppm/C) | Resistance tolerance (%) | Dimensions (mm) L x W x T | Nominal weight (g) |
| LHVC0805 | 0.125 | 100K to 10M | 300 | 800 | 500V | 200 | 1, 5 | 2.00 0.15 x 1.25 +0.15/-0.10 x 0.55 0.10 | 0.005 |
| LHVC1206 | 0.25 | 100K to 10M | 400 | 1000 | 500V | 200 | 1, 5 | 3.10 0.15 x 1.55 +0.15/-0.10 x 0.55 0.10 | 0.012 |
| LHVC2010 | 0.5 | 50K to 10M | 800 | 3000 | 500V | 200 | 1, 5 | 5.00 0.10 x 2.50 +0.15/-0.10 x 0.55 0.10 | 0.036 |
Performance Data
| Test Condition | Parameter | Value |
| Maximum Load at rated power (1000hrs cyclic load at 70C) | R% | 3 |
| Short term overload (6.25 x rated power for 5s) | R% | 2 (0805, 2010): 3 (1206) |
| Temperature rapid change (-55 / +155C, 5 cycles) | R% | 0.5 (1% tolerance chips): 1 (5% tolerance chips) |
| Damp heat steady state | R% | 3 |
| Insulation resistance | Ohms | >1000M |
Construction
Pd/Ag terminations are applied to the top and bottom of an alumina substrate. A resistive element is printed between the top face conductors, which is then adjusted to value and protected. A wraparound conductor is applied to join the top and bottom sides. The terminations are electroplated with a Ni barrier layer prior to plating with a Sn finish.
Solvent Resistance
The body protection and marking are resistant to all normal industrial solvents suitable for printed circuits.
Flammability
The resistor will not burn or emit incandescent particles under any condition of applied temperature or overload.
Solderability
95% min coverage (MIL-STD 202F / 208H, 235C 2 secs)
Ordering Procedure Example
LHVC0805 at 100k ohms and 1% tolerance on reel of 5000 pieces:
LHVC0805 100K F T 5
Type Value (use IEC62 code) Tolerance (use IEC62 code) Packing
F 1% T5 0805 / 1206 5,000 / reel
J 5% T4 Tape 2010 4,000 / reel
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.