Noise Suppression Wire Wound Common Mode Choke Walsin WQCF2012FHM900PB with High Impedance at 100MHz
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The WQCF2012FH Series is a wire-wound common mode choke designed for high-performance applications. It offers excellent solderability and meets AEC-Q200 standards, making it suitable for demanding environments. This series is ideal for noise filtering in digital interfaces and consumer electronics.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Not specified
- Color: Not specified
- Certifications: AEC-Q200
Technical Specifications
| Series | Part Number | Impedance ( @100MHz) 20% | DCR MAX. () | RATE CURRENT (mA) | Cut-off Frequency (GHz) TYP. | Rated Voltage (Vdc) | Insulation Resistance (MOHM) MIN. |
|---|---|---|---|---|---|---|---|
| WQCF2012FH | WQCF2012FHM670PB | 67 | 0.25 | 400 | 6 | 50 | 10 |
| WQCF2012FH | WQCF2012FHM900PB | 90 | 0.30 | 370 | 6 | ||
| WQCF2012FH | WQCF2012FHM121PB | 120 | 0.35 | 330 | 6 |
Dimensions
Unit: mm
| SERIES | M1 | M2 | M3 | M4 |
|---|---|---|---|---|
| WQCF2012FH | 2.00.2 | 1.200.2 | 1.200.2 | 0.40(TYP.) |
Ordering Information
WQ CF 2012 FH M 670 P B
- Product Code: WQ (Inductor)
- Series: CF 2012 FH (AEC-Q200 COMMON MODE CHOKE 2.0 * 1.2 mm)
- Tolerance: M ( 20%)
- Value: 670 (67OHM), 900 (90OHM), 120 (120OHM)
- Packing Code: P (7 Reeled (Embossed tape)), B (STD)
Operating Conditions
- Operating Temperature Range: -40 ~ +125
- MSL: LEVEL 1
Reliability Performance
| Test Item | Test Condition | Standard |
|---|---|---|
| High Temperature Exposure (Storage) | 1000 hrs. at rated operating temperature (e.g. 125C part can be stored for 1000 hrs. @ 125C. Same applies for 105C and 85C. Unpowered. Measurement at 244 hours after test conclusion. | MIL-STD-202 Method 108 |
| Temperature Cycling | 1000 cycles (-40C to +125C). Note: If 85C part or 105C part the 1000 cycles will be at that temperature. Measurement at 244 hours after test conclusion. 30min maximum dwell time at each temperature extreme. 1 min. maximum transition time. | JESD22 Method JA-104 |
| Biased Humidity | 1000 hours 85C/85%RH. Unpowered. Measurement at 244 hours after test conclusion. | MIL-STD-202 Method 103 |
| Operational Life | 1000 hrs. @ 105C. If 85C or 125C part will be tested at that temperature. Measurement at 244 hours after test conclusion. | MIL-PRF-27 |
| Mechanical Shock | Condition C, Peak Value: 100gs, Duration: 6ms, Waveform: Half-sine Velocity Change: 12.3ft/sec | MIL-STD-202 Method 213 |
| Vibration | 5g's for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8"X5" PCB, .031" thick, 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2000 Hz. | MIL-STD-202 Method 204 |
| Resistance to Soldering Heat | Condition B No pre-heat of samples. Note: Single Wave Solder - Procedure 2 for SMD and Procedure 1 for Leaded with solder within 1.5mm of device body. | MIL-STD-202 Method 210 |
| ESD Passive Component Human Body Model (HBM) | Electrostatic Discharge (ESD) Test. Only direct contact discharge, record the voltage value what the sample can pass. | AEC-Q200-002 Or ISO/DIS10605 |
| Solderability | For both Leaded & SMD. Electrical Test not required. Magnification 50X. Conditions: Leaded: Method A @ 235C, category 3. SMD: a) Method B, 4 hrs @ 155C dry heat @ 235C b) Method B @ 215C category 3. c) Method D category 3 @ 260C. | J-STD-002 |
| Flammability | V-0 or V-1 Acceptable | UL-94 |
| Board Flex | 60 sec minimum holding time. | AEC-Q200-005 |
| Terminal Strength (SMD) | Force of 900g for 60 seconds. | AEC-Q200-006 |
Tape & Reel Packaging
Quantity per reel: 2K pcs
| DIM. | A | B | C | D | N | P | W | t |
|---|---|---|---|---|---|---|---|---|
| DIM. | 178 | 13.0 | 8.4 | 12.5 | 75 | 4.0 | 8.00 | 0.24 |
| TOL. | 2.0 | 0.8 | +1.0-0 | MAX | 1.5 | 0.10 | 0.20 | 0.01 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina