Thick Film Chip Resistors SCR0603F6K65 RoHS Compliant Lead Free Halogen Free Suitable for Electronic
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Thick Film Chip Resistors
This document specifies the SCR series lead-free, halogen-free thick film chip resistors. These are general-purpose resistors designed for a wide range of applications. The resistors are manufactured to meet RoHS requirements, with lead in the resistive layer glass material being exempt.
Product Attributes
- Brand: VIC (implied by URL and development vision)
- Origin: Anhui XiangSheng Technology Co., Ltd.
- Material: Thick Film
- Certifications: RoHS compliant (lead-free, halogen-free)
Technical Specifications
| Type | Size | Tolerance | Resistance Range | Rated Power (W) | Max. Rated Voltage (V) | Max. Overload Voltage (V) | T.C.R (ppm/) | Operating Temp. Range | JUMPER (0) Resistance |
|---|---|---|---|---|---|---|---|---|---|
| SCR 0402 | 0402 | J (5%) | 1R9.1 (E-24) | 1 | 50 | 100 | 400 | -55~ +155 | 50m MAX. |
| SCR 0402 | 0402 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 50 | 100 | 100 | 50m MAX. | |
| SCR 0603 | 0603 | J (5%) | 1R9.1 (E-24) | 1 | 75 | 150 | 400 | -55~ +155 | 50m MAX. |
| SCR 0603 | 0603 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 75 | 150 | 100 | 50m MAX. | |
| SCR 0805 | 0805 | J (5%) | 1R9.1 (E-24) | 1 | 150 | 300 | 400 | -55~ +155 | 50m MAX. |
| SCR 0805 | 0805 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 150 | 300 | 100 | 50m MAX. | |
| SCR 1206 | 1206 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 1206 | 1206 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. | |
| SCR 1210 | 1210 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 1210 | 1210 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. | |
| SCR 2010 | 2010 | J (5%) | 1R9.1 (E-24) | 3 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 2010 | 2010 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 3 | 200 | 400 | 100 | 50m MAX. | |
| SCR 2512 | 2512 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 2512 | 2512 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance (TCR) | Measured at -55 or +125 relative to room temperature. | Refer to 3. Specification Table |
| Short Time Overload | Applied 2.5 times rated voltage for 5 seconds, rest 30 minutes. | Resistance change rate: 0.5%/1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit or burnout. |
| Intermittent Overload | 2.5x rated voltage, 1s ON, 25s OFF, 10000 cycles. | Resistance change rate: 1: (5.0%+0.10); |
| Terminal Strength | Test 1: 5N force applied to back of resistor for 10 sec. Test 2: Gradually apply force to back of resistor. | Test 1: No damage, no side conductor detachment, no body fracture. Test 2: Pull force 5N. |
| Resistance to Solvent | Immersed in Isopropyl alcohol at 20~25 for 50.5 min, rest 48 hr. | Resistance change rate: (1.0%+0.05). Appearance: No damage, no G2 protective layer or tin layer leaching. |
| Solderability | Pre-treatment: PCT machine at 105, 100% RH, 1.22105 pa for 4 hours. Immerse in 2355 furnace for 2 seconds. | Soldered area > 95%. |
| Resistance to Soldering Heat | Test 1 (Solder pot): Immerse in 260+5/-0 for 10 sec, rest 60 min. Test 2 (Solder pot): Immerse in 260+5/-0 for 30 sec. Test 3 (Soldering iron): 35010 for 3 sec. | Test 1: Resistance change rate: 1: (1.0%+0.05); Electrode appearance: No abnormality, no side conductor detachment. Test 2: Soldered area > 95%; No underlying material visible at electrode edge. Test 3: Resistance change rate: 1: (1.0%+0.05); Electrode appearance: No abnormality, no side conductor detachment. |
| Bending Test | Weld resistor on bending test board, apply force to center. Downward depth: 0201/0402=5mm, 0603/0805=3mm, 1206+=2mm. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no side conductor detachment, no body fracture. |
| Resistance to Dry Heat | Oven at 1555 for 1000 hrs (RTT01 at 1253). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05); 2%/5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
| Thermal Shock | -55 for 15 min, +125 for 15 min, 300 cycles. | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05); 2%/5%: (2.0%+0.05). Appearance: No damage, short circuit, or burnout. |
| Moisture Load Life | 402, 90~95% RH, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change rate: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
| Load Life | 702 oven, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change rate: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina