Thick Film Chip Resistors VO SCR2512J1R5 RoHS Compliant Lead Free Halogen Free Electronic Components
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Thick Film Chip Resistors
Product Description: This document specifies the SCR series of lead-free and halogen-free thick film chip resistors. These are general-purpose resistors designed for a wide range of applications. The product is RoHS compliant, with lead in the electrode being lead-free and lead in the resistive layer glass material being exempt under RoHS.
Product Attributes:
- Brand: VICovo (implied by website www.vicovo.com)
- Origin: Anhui XiangSheng Technology Co., Ltd.
- Material: Thick Film
- Certifications: RoHS compliant (lead-free, halogen-free)
Technical Specifications
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R. (ppm/) | Resistance Range () | Operating Temperature Range | JUMPER (0) Resistance | Tolerance (F/D) | Tolerance (J) |
|---|---|---|---|---|---|---|---|---|---|
| 0201 | 1/16 W | 25V | 50V | 400 | 1R9.1 | -55~ +125 | 50m MAX. | 1R9.1 | 1R9.1 |
| 0402 | 1/16 W | 50V | 100V | 400 | 1R9.1 | 10R10M | 10R10M | ||
| 0603 | 1/10 W | 75V | 150V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| 0805 | 1/8 W | 150V | 300V | 400 | 1R9.1 | 10R10M | 10R10M | ||
| 1206 | 1/4 W | 200V | 400V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| 1210 | 1/2 W | 200V | 400V | 400 | 1R9.1 | 10R10M | |||
| 2010 | 3/4 W | 200V | 400V | 400 | 1R9.1 | 10R10M | |||
| 2512 | 1 W | 200V | 400V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance (TCR) | TCR (ppm / ) R2R1 R1T2T1106 R1: Resistance at room temp. R2: Resistance at -55 or +125 T1: Room temp. T2: -55 or +125 | According to JIS-C5201-1 4.8 |
| Short Time Overload | Apply 2.5 times rated voltage for 5 seconds, rest for 30 mins. | Resistance change rate: 0.5%/1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Intermittent Overload | Apply 2.5 times rated voltage, 1 sec ON, 25 sec OFF, 10000+400/-0 cycles. | Resistance change rate: 1: (5.0%+0.10). |
| Terminal Strength | Test 1: Apply 5N force for 10 sec to rear. Test 2: Gradually apply force to rear. | Test 1: No damage, no conductor detachment, no body fracture. Test 2: Pulling force 5N. |
| Resistance to Solvent | Immerse in isopropyl alcohol at 20~25 for 50.5 mins, rest for 48 hrs. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no leaching of protective or tin layer. |
| Solderability | Pre-treatment: 4 hrs aging at 105, 100% RH, 1.22105 pa. Immerse in 2355 solder for 2 sec. | Soldered area > 95%. |
| Resistance to Soldering Heat | Test 1 (Solder bath): Immerse in 260+5/-0 for 10 sec+1/-0, rest 60 mins. Test 2 (Solder bath): Immerse in 260+5/-0 for 30+1/-0 sec. Test 3 (Soldering iron): 35010, 3+1/-0 sec. | Test 1: Resistance change rate: 1: (1.0%+0.05). Appearance: No abnormalities. Test 2: Soldered area > 95%. No underlying material visible at electrode edge. Test 3: Resistance change rate: 1: (1.0%+0.05). Appearance: No abnormalities. |
| Bending Test | Apply force to center of test board with chip resistor mounted. Downward depth: 0201/0402=5mm, 0603/0805=3mm, 1206+=2mm. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no detachment, no fracture. |
| Resistance to Dry Heat | 1000+48/-0 hrs in oven at 1555 (1253 for RTT01). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05), 2%/5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Thermal Shock | 300 cycles: -55 (15 min), +125 (15 min). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05), 2%/5%: (2.0%+0.05). Appearance: No damage, short circuit, or burn. |
| Moisture Load Life | 90 min ON, 30 min OFF, 1,000 hrs at 402, 90~95% RH, with rated voltage applied. | Resistance change rate: 1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Load Life | 90 min ON, 30 min OFF, 1,000 hrs in oven at 702, with rated voltage applied. | Resistance change rate: 1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina