Low Insertion Loss Multilayer Ceramic Filter Walsin RFLPF10050G9DM1T76 for GSM LTE Frequency Bands
Product Overview
The RFLPF Series 1005 (0402) MULTILAYER CERAMIC LOW PASS FILTER is designed for RF applications, particularly in GSM & LTE bands. It offers a miniature footprint, low profile thickness, low insertion loss, and high attenuation on harmonic suppression, making it suitable for various wireless communication systems.
Product Attributes
- Brand: ASC (implied by ASC_RFLPF10050G9DM1T76)
- Compliance: RoHS Compliance, Halogens Free Product
- Construction: LTCC process
Technical Specifications
| Specification | Value | Conditions |
| Part Number | RFLPF10050G9DM1T76 | |
| Frequency Range | 617 ~ 960 MHz | |
| Insertion Loss | 0.60 dB max. | at 25 |
| Insertion Loss | 0.65 dB max. | at -40 ~ +85 |
| Attenuation | 13 dB min. | @ 1554 ~ 1610 MHz |
| Attenuation | 35 dB min. | @ 1805 ~ 1830 MHz |
| Attenuation | 35 dB min. | @ 2110 ~ 2170 MHz |
| Attenuation | 30 dB min. | @ 1710 ~ 2700 MHz |
| VSWR | 2.0 max | |
| Impedance | 50 | |
| Moisture Sensitivity Levels (MSL) | LEVEL 1 | (Refer to : IPC/JEDEC J-STD-020) |
| Operating Temperature Range | -40 ~ +85 | |
| Storage Temperature Range (Component) | -40 ~ +85 | |
| Storage Temperature Range (Before Soldering) | +5 ~ +40 | Humidity: 30 to 70% relative humidity |
| Dimensions (L x W x T) | 1.0 x 0.5 x 0.4 mm | |
| Termination Dimensions (A, B) | 0.18 0.05 mm | |
| Termination Dimensions (C) | 0.05 0.05 mm | |
| Termination Dimensions (D) | 0.125 0.05 mm | |
| Termination Dimensions (E) | 0.15 0.05 mm | |
| Termination Dimensions (F) | 0.05 0.05 mm | |
| Pin Connection | 1: NC, 2: GND, 3: NC, 4: Output, 5: GND, 6: Input |
Reliability Test Summary
| Test Item | Test Condition / Method | Specification |
| Solderability | JIS C 0050-4.6, JESD22-B102D (Solder bath temp: 2355, Immersion time: 20.5 sec) | At least 95% of a surface of each terminal electrode must be covered by fresh solder. |
| Leaching | IEC 60068-2-58 (Solder bath temp: 2605, Immersion time: 300.5 sec) | Loss of metallization on the edges of each electrode shall not exceed 25%. |
| Resistance to Soldering Heat | JIS C 0050-5.4 (Preheating: 120~150, 1 min; Solder temp: 2705, Immersion time: 101 sec) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Drop Test | JIS C 0044 (Height: 75 cm, Test Surface: Rigid surface of concrete or steel, Times: 6 surfaces/unit) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Vibration | JIS C 0040 (Frequency: 10Hz~55Hz~10Hz (1min), Total amplitude: 1.5mm, Test times: 6hrs) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Adhesive Strength of Termination | JIS C 0051- 7.4.3 (Pressurizing force: 5N for 0603) | No remarkable damage or removal of the termination. |
| Bending Test | JIS C 0051- 7.4.1 (Deflection: 1mm, Pressure maintained: 51 sec) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Temperature Cycle | JIS C 0025 (100 cycles: -40 (303 min) to +85 (303 min)) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| High Temperature Test | JIS C 0021 (Temp: 852, Duration: 1000+24/-0 hours) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Humidity Test | JIS C 0022 (Humidity: 90% to 95% R.H., Temp: 402, Time: 1000+24/-0 hrs) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
| Low Temperature Test | JIS C 0020 (Temp: -402, Duration: 1000+24/-0 hours) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics within -40 ~ 85C. |
Ordering Code Explanation
RF LPF 1005 0G9 D M1T76
- RF: Walsin RF device
- LPF: Low Pass Filter
- 1005: Dimension (L=1.0mm, W=0.5mm)
- 0G9: Central Frequency (0.9 GHz)
- D: Application (698~960 MHz)
- M1T76: Specification Design Code
Minimum Ordering Quantity: 4000 pcs per reel.
Packaging
Paper Tape specifications (unit :mm)
| Index | Dimension (mm) |
| A | 0.67 0.10 |
| Ao | 1.14 0.10 |
| B | 1.50 + 0.05 |
| Bo | 0.42 0.10 |
| D | 8.0 0.30 |
| E | 1.75 0.10 |
| F | 3.50 0.20 |
| Po | 4.00 0.10 |
| P1 | 2.00 0.10 |
| P2 | 2.00 0.10 |
| T | |
| W |
Taping Quantity: 4000 pieces per 7 reel
Reel Dimensions
| Index | Dimension (mm) |
| A | 178.0 |
| B | 60.0 |
| C | 13.0 |
Caution of Handling
Limitation of Applications: Please contact us before using our products for applications requiring especially high reliability to prevent defects that might directly cause damage to third partys life, body or property. Examples include Aircraft equipment, Aerospace equipment, Undersea equipment, Medical equipment, Disaster prevention/crime prevention equipment, Traffic signal equipment, Transportation equipment (vehicles, trains, ships, etc.), and applications of similar complexity and/or reliability requirements.
Storage condition: Products should be used within 6 months from the day of WALSIN outgoing inspection. Storage environment conditions: Temperature: +5 to +40, Humidity: 30 to 70% relative humidity. Avoid storage in corrosive gases (sulfur, chlorine gas, acid) which may cause oxidization of electrode and poor solderability. Store on a palette, in an airtight packaged condition, and in a warehouse without heat shock, vibration, or direct sunlight.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.