Dual band RF multilayer ceramic coupler Walsin RFCPL0605030L9T with low profile and RoHS compliance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The RFCPL0605 Series is a RoHS and Halogen-Free compliant multilayer ceramic coupler designed for dual-band RF applications operating at 2.4 GHz and 5 GHz. It features a miniature footprint, low profile, and low insertion loss, making it suitable for compact RF designs. The coupler is ideal for 2.4GHz/5GHz band RF applications.

Product Attributes

Brand: ASC
Certifications: RoHS Compliance, Halogens Free

Technical Specifications

Specification	2400 ~ 2500 MHz	4900 ~ 5850 MHz
Insertion Loss	0.40 dB max. at +25C 0.45 dB max. at -40C ~ +85C	0.40 dB max. at +25C 0.45 dB max. at -40C ~ +85C
Coupling Factor	21.5 1.5 dB	15.0 1.5 dB
Directivity	15 dB min.	15 dB min.
VSWR	1.3 max.	1.3 max.
Impedance	50	50
Moisture Sensitivity Levels	MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
Operation Temperature Range	-40 ~ +85
Storage Temperature Range (Component)	-40 ~ +85
Storage Temperature Range (Before Soldering)	+5 ~ +40
Humidity (Before Soldering)	30 to 70% relative humidity

Test Item	Test Condition / Test Method	Specification
Solderability	JIS C 0050-4.6 / JESD22-B102D Solder bath temperature235 5C Immersion time2 0.5 sec SolderSn3Ag0.5Cu for lead-free	At least 95% of a surface of each terminal electrode must be covered by fresh solder.
Leaching	IEC 60068-2-58 Solder bath temperature260 5C Leaching immersion time30 0.5 sec Solder : SN63A	Loss of metallization on the edges of each electrode shall not exceed 25%.
Resistance to soldering heat	JIS C 0050-5.4 Preheating temperature120~150C, 1 minute. Solder temperature2705C *Immersion time101 sec SolderSn3Ag0.5Cu for lead-free	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Drop Test	JIS C 0044 Height75 cm Test SurfaceRigid surface of concrete or steel. *Times6 surfaces for each units2 times for each side.	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Vibration	JIS C 0040 Frequency10Hz~55Hz~10Hz(1min) Total amplitude1.5mm *Test times6hrs.(Two hrs each in three mutually perpendicular directions)	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Adhesive Strength of Termination	JIS C 0051- 7.4.3 Pressurizing force 2N(0603 ; 1.6 x 0.8 mm) 10N(>0603 ; 1.6 x 0.8 mm) Test time51 sec	No remarkable damage or removal of the termination.
Bending test	JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec.	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Temperature cycle	JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
High temperature	JIS C 0021 Temperature85C2C Test duration1000+24/-0 hours	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Humidity (steady conditions)	JIS C 0022 Humidity90% to 95% R.H. Temperature402C *Time1000+24/-0 hrs.	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.
Low temperature	JIS C 0020 Temperature-40C2C Test duration1000+24/-0 hours	No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C.