Miniaturized Metallized Polyester Film Capacitor W222A182JD5L00A00A Rated 100V Capacitance 0.0018uF

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Specification Approval for Metallized Polyester Film Capacitors (Miniaturized)

This document outlines the specifications for the W22 series of miniaturized metallized polyester film capacitors, designed for various electronic applications. These capacitors offer reliable performance and compact dimensions.

Product Attributes

Brand: WDI ()
Product Type: Metallized Polyester Film Capacitor (Miniaturized)
Material: Metallized Polyester Film, Epoxy Resin (flame retardant UL94V-0)
Origin: Shenzhen, China ()
Certifications: UL94V-0 (for outer encapsulation)

Technical Specifications

Product Part Number	Model	Capacitance (uF)	Rated Voltage (V)	Capacitance Tolerance	Pitch (mm)	Body Dimensions (mm) (W x H x T)	Lead Diameter (mm)
W222A182JD5L00A00A	WDQV-182J-P5	0.0018	100	5% (J)	5.0	7.5 x 7.0 x 4.0	0.5

General Technical Parameters

Parameter	Specification
Reference Standards	GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)
Climate Category	55/105/21
Rated Temperature	85
Operating Temperature Range	-55 ~ 105
Rated Voltage Options	63V, 100V, 250V, 400V
Capacitance Range	0.0001F ~ 1.0F
Capacitance Tolerance Options	5% (J), 10% (K)
Withstand Voltage	1.4UR (5s)
Dissipation Factor (tan )	1.0% (20, 1KHz)
Insulation Resistance	15000M (UR100V, CR0.33F) or 5000S (UR100V, CR>0.33F) (20, 1min) 15000M (UR>100V, CR0.33F) or 5000S (UR>100V, CR>0.33F) (20, 100V, 1min)

Reliability and Environmental Testing

Test Type	Standard	Conditions	Acceptance Criteria
Solderability	IEC 68-2-20	2355, 2.0s0.5s	Tinning on lead surface is good.
Resistance to Soldering Heat	IEC 68-2-20	2605, 10s1s	C/C: 2%, tan : 0.3% (1 KHz)
Rapid Change of Temperature	IEC 68-2-14	-55 to +105, 30min dwell, 5 cycles	C/C: 5%, tan : 0.3% (1 KHz), Insulation Resistance: 50% of initial.
Vibration	IEC 68-2-6	10-500Hz, 6 hours total	No visible damage or looseness.
Shock	IEC 68-2-29	4000 times, 390m/s, 6ms pulse	No visible damage or looseness.
Dry Heat	IEC 68-2-2	+105, 16 hours	No permanent breakdown, no visible damage, clear marking. C/C: 5%, tan : 0.3% (1 KHz), Insulation Resistance: 50% of initial.
Cold	IEC 68-2-1	-55, 2 hours	(See Dry Heat for acceptance criteria after cycle)
Low Pressure	IEC 68-2-13	1535, 8.5KPa, 1 hour (rated voltage applied in last 1 min)	(See Dry Heat for acceptance criteria after cycle)
Cyclic Damp Heat	IEC 68-2-30	Db, severity b, rated voltage applied for 1 min after test.	(See Steady State Damp Heat for acceptance criteria)
Steady State Damp Heat	IEC 68-2-3	402, 93+2/-3 %, 21 days	No visible damage, clear marking. C/C: 5%, tan : 0.5% (1 KHz), Insulation Resistance: 50% of initial.