Metal Foil Current Sensing Resistor Walter Elec HFCL0603MW33R002F with MnCu Alloy and Alumina Ceramic Substrate
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
HFCL0603/1206-series Current Sensing Resistor
This specification covers the HFCL0603/1206-series Metal Foil Current Sensing Resistors, designed for accurate current measurement applications. These resistors utilize a MnCu alloy for the resistive element and are constructed on an alumina ceramic substrate, offering reliable performance.
Product Attributes
- Brand: HFCL
- Material: MnCu alloy (Resistive element)
- Substrate: Alumina Ceramic
- Protective Coating: Flame-retardant epoxy, meets UL-94-V0 requirements (Green)
- Marking Coating: Flame-retardant epoxy, meets UL-94-V0 requirements (White/Black)
- Certifications: UL-94-V0 (Protective coating)
Technical Specifications
| Part Number Series | Size (L x W) | Nominal Resistance Value | Power Rating (Watt) | Resistance Tolerance (%) | TCR (ppm) | Operating Temperature Range |
|---|---|---|---|---|---|---|
| HFCL0603MW33-series | 0.800.15 x 1.600.20 mm | R001~R025 (1~4m), R005~R025 (5~25m) | 0.33W | 1%(F) (1~4m), 50 (5~25m) | 100 (1~4m), 50 (5~25m) | -55155 |
| HFCL1206M1W0-series | 1.550.20 x 3.200.20 mm | 0M50~R025 (0.5~25m) | 1.0W | 1%(F) (0.5~4m), 0.5%(D) / 1%(F) (5~25m) | 150 (0.5~4m), 50 (5~25m) | -55155 |
Product Dimensions
| Part Number Series | W (mm) | L (mm) | A (mm) | B (mm) | C (mm) | D (mm) | T (mm) |
|---|---|---|---|---|---|---|---|
| HFCL0603MW33-series | 1.600.20 | 0.800.15 | 0.180.10 | 0.230.10 | 0.400.10 | 0.930.20 | 0.550.10 |
| HFCL1206M1W0-series | 3.200.20 | 1.550.20 | 0.410.20 | 0.460.20 | 0.500.20 | 2.160.20 | 0.500.20 |
Reliability Test Standards
| Parameter | Conditions | Requirements | Test Method |
|---|---|---|---|
| Short Time Over Load | P=2.5Pr; T=252C, t=5sec. | 1.0% | IEC60115-1 4.13 |
| High Temp. Exposure | T=+1702C, t=1000h | 1.0% | IEC60115-1 4.25 |
| Low Temp. Storage | T=-552C, t=1000h | 1.0% | IEC60115-1 4.25 |
| Moisture Load Life (60, 95%RH) | Vtest=Vmax; T=602C; RH=95%; t=90min ON, 30min OFF, 1000h | 2.0% | IEC60115-1 4.25 |
| Thermal Shock | -553C to 1253C (30 min dwell each temp, 1 min max transition), 1000 cycles | 1.0% | JESD22-A-104 |
| Load Life at 70C | Vtest=Vmax; T=702C; t=90min ON, 30min OFF, 1000h | 1.0% | IEC60115-1 4.25 |
| Solderability | Dip into solder at T=2455C, t=30.5sec. | Covered area >95% | IEC60115-1 4.17 |
| Resistance to Solder Heat | 1 reflow cycle (JEDEC J-STD-020) followed by dip at T=260C, t=10 sec. | Part must meet initial specifications | JEDEC J-STD-020 |
| Mechanical Shock | a=100G, t=11ms, 5 shocks | 1.0% | IEC60115-1 4.21 |
| Substrate Bending | Span=90mm; Bend=2mm; Test board=Glass-Epoxy (1.6mm thickness) | 1.0% | IEC60115-1 4.33 |
Storage Conditions
- Under airtight conditions at +1040, RH 75% for 2 years.
- Without dew at +1060, RH=95% for a maximum of 30 days.
Soldering Pad Dimensions and Conditions
| Part Number Series | P (mm) | W (mm) | D (mm) | V (mm) | E (mm) | Power Rating (W) |
|---|---|---|---|---|---|---|
| HFCL0603MW33-series | 0.35 | 1.30 | 0.40 | 0.40 | 0.20 | 0.33W |
| HFCL1206M1W0-series | 0.762 | 2.29 | 1.014 | 0.762 | 0.381 | 1.00W |
Recommended Customer Soldering Parameters
- Wave Solder Temperature Profile: Preheating: 100~130 (max. 100 sec); Soldering: 250~265 (max. 10 sec). Maximum allowed temperature: 2605 (max. 10 sec).
- Solder Reflow Temperature Profile: Preheating: 145 15 (max. 120 sec); Soldering: min. 220 (max. 60 sec). Maximum allowed temperature: 2605 (max. 10 sec).
- Rework Temperature (hot air equipment): 350, 3~5 seconds.
- Recommended Reflow Methods: IR, vapor phase oven, hot air oven. Exceeding recommended reflow temperatures may compromise performance.
Lot Acceptance Test Requirements
- Visual: No stains, dirt, printing errors, or damage.
- Dimensions: All dimensions within specified limits.
- Resistance (Ro): Within specified limits at 25 (4-wire measurement).
- TCR: Within specified limits (calculated from resistance at 25 and 125).
- Insulation Resistance (Ri): 100M between protective layer and resistive body.
Packaging Information
| Part Number Series | Quantity (pcs) | Weight (g) |
|---|---|---|
| HFCL0603MW33-series | 5,000 | 13040 |
| HFCL1206M1W0-series | 5,000 | 16040 |
Reel & Tape Specifications
| Part Number Series | A5 (mm) | N2 (mm) | W11 (mm) |
|---|---|---|---|
| HFCL0603MW33-series | 178 | 60 | 9.0 |
| HFCL1206M1W0-series | 178 | 60 | 9.0 |
Peeling Strength of Seal Tape
- F = Peeling Strength: 0.1 1.0N (10 - 100gf)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina