Current Sensor Resistor Walter Elec MSH2512N2W0R003F 2 Watt Alloy Resistive Element Flame Retardant
MSH 2512 Series Current Sensor Resistor
The MSH 2512 series are pure metal, short electrode, two-terminal, high-power current sensing resistors designed for precise current measurement. Utilizing an alloy resistive element and nickel/tin terminals, these resistors offer robust performance and reliability.
Product Attributes
- Brand: MSH
- Series: MSH2512
- Material: Alloy (Resistive element), Ni/Sn (Terminal electrode), Flame-retardant epoxy (Protective coating)
- Color: Black (Protective coating)
- Certifications: UL-94-V0 (Protective coating)
Technical Specifications
| Part Number | Series Number | Material | Power Rating | Nominal Resistance Value | Resistance Tolerance | Size (L x W x T) | Operating Temperature | Storage Conditions |
|---|---|---|---|---|---|---|---|---|
| MSH2512N2W0-series | MSH2512 | N (Alloy) | 2W (2.0 Watt) | R001~R010 (1m to 10m) | F=1%, G=2%, H=3%, J=5% | 6.400.20 x 3.200.20 x 1.200.2 mm | -55170 | 2 years at +1040, 75% RH (airtight); 30 days at +1060, 95% RH (non-condensing) |
| MSH2512N3W0-series | MSH2512 | N (Alloy) | 3W (3.0 Watt) | R001~R010 (1m to 10m) | F=1%, G=2%, H=3%, J=5% | 6.400.20 x 3.200.20 x 1.200.2 mm | -55170 | 2 years at +1040, 75% RH (airtight); 30 days at +1060, 95% RH (non-condensing) |
Electrical Characteristics
| Part Number | Resistance Value (m) | Power Rating (Watt) | Resistance Tolerance (%) | TCR (ppm) |
|---|---|---|---|---|
| MSH2512N2W0-series | 1~3 | 2 | 1%(F) | 100 |
| 4~10 | 2 | 75 | ||
| MSH2512N3W0-series | 1~3 | 3 | 1%(F) | 100 |
| 4~10 | 3 | 75 |
Solder Pad Size and Welding Conditions
| Part Number | P (mm) | W (mm) | D (mm) | t (m) | Loading (W) |
|---|---|---|---|---|---|
| MSH2512N2W0-series | 3.18 | 3.57 | 2.11 | 105 | 2.0W |
| MSH2512N3W0-series | 3.18 | 3.57 | 2.11 | 105 | 3.0W |
Recommended Customer Soldering Parameters
Wave Solder Temperature Condition:
- Preheating: 100~130, max.100 sec.
- Soldering: 250~265 max. 10 sec.
- Maximum allowed temperature: 2605, max. 10sec.
Solder Reflow Temperature Condition:
- Preheating: 145 15, max.120 sec.
- Soldering: min. 220, max. 60 sec.
- Maximum allowed temperature: 2605, max. 10sec.
Rework Temperature (hot air equipment): 350, 3~5 seconds
Recommended Reflow Methods: IR, vapor phase oven, hot air oven.
Lot Acceptance Test Requirements
| Test Item | Procedure | Acceptance Criteria |
|---|---|---|
| Visual | Visual inspection with a magnifying glass. | No outstanding stains, dirt, printing errors, or damage. |
| Dimensions | Measurement using appropriate, calibrated measuring instruments. | All dimensions within specified limits. |
| Resistance (Ro) | Measured using 4-wire technique at 25. | Resistance values within specified limits. |
| TCR | Resistance measured at 25 and 125 using 4-wire method, then calculated using the formula: TCR = (Rb-Ra)/Ra 1/(Tb-Ta) 10^6. | TCR values within specified limits. |
| Insulation Resistance (Ri) | Measured using a high ohm meter. | Insulation resistance between protective layer and resistive body > 100M. |
Packaging Information
| Type Number | Quantity (pcs) | Weight (g) | Reel Diameter A5 (mm) | Number of Holes N2 (mm) | Tape Width W11 (mm) |
|---|---|---|---|---|---|
| MSH2512N2W0-series | 1,500 | 26525 | 178 | 60 | 13 |
| MSH2512N3W0-series | 1,500 | 26525 | 178 | 60 | 13 |
Peeling Strength of Seal Tape: 0.1 1.0N (10 - 100gf)
Other
Any deviations from this specification require mutual agreement between parties. Modifications to this specification will be made by WALTER ELECTRONIC CO., LTD. upon mutual agreement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.