Electronic Component XR XRFWHP0660A-2R2M Molding Power Inductor 2.2uH Inductance 7.4A Rated Current

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the XRFWHP0660A-2R2M Molding Power Inductor. It details electrical characteristics, dimensions, test data, and packaging information for this component, designed for various electronic applications requiring precise inductance and current handling capabilities.

Product Attributes

Brand: xiangru electronics
Origin: Dongguan, China
Product Name: Molding Power Inductors
Our Part Number: XRFWHP0660A-2R2M

Technical Specifications

Item	Specification	Test Conditions / Method
Product Name	Molding Power Inductors	-
Our Part No.	XRFWHP0660A-2R2M	-
Customer P/N	XRFWHP0660A	-
Description	2.2uH 20% 7.4A	-
Inductance (L)	2.2H 20%	1MHz, 0.1V
DC Resistance (DCR)	7.4A Max. / 7.0 (Typ.)	@25
Saturation Current (Isat)	15.0A Typ.	L drop approximately 30% @ IDC 15.0A (L 15A/L0A*100% 70%Internal control standards at 40% max)
Rated Current (Irms)	18.1A Typ.	(T)40
Use Frequency Range	6.1 MHz (REF)	-
Operating Temperature Range	-55 ~ +125	-
Dimensions (A)	6.40.3 mm	-
Dimensions (B)	6.60.3 mm	-
Dimensions (C)	5.80.3 mm	-
Dimensions (D)	5.10.5 mm	-
Dimensions (E)	1.40.3 mm	-
Dimensions (F)	2.60.3 mm	-
PCB Pattern (G)	2.50 m/m (REF)	-
PCB Pattern (H)	5.60 m/m (REF)	-
PCB Pattern (I)	1.60 m/m (REF)	-
Rated Current Test	Inductance change	Applied rated DC current for 4 hours
Overload Test	No evidence of electrical damage	Applied 1.5 times rated DC current for 5 minutes
Solder Heat Resistance	No electrical/mechanical damage, Inductance change 10%	Preheat: 150 100s, Solder Temp: 2555, Dip Time: 10s Max.
Vibration Test	-	Amplitude: 1.5 mm, Freq: 10-55-10Hz/1min, Direction: X,Y,Z, Duration: 2 Hrs/axis
Shock Test	-	Dropped 10 times from 1m height onto 3cm wooden board
Solderability Test	>90% of terminal electrode covered with solder	Preheat: 150 120s, Solder Bath: 2555, Dip Time: 10s Max.
Component Adhesion (Push)	Min. 1.5Kg	Reflow soldered (2555 for 10s) to copper substrate, force applied to side
Component Adhesion (Pull)	Min. 1.5Kg	10cm wire inserted into eye, bent and wound
Flexure Strength	No damage to dielectric	Solder to substrate, bend substrate by 2mm and return
Resistance to Solvent Test	No case deformation, appearance change, or marking alteration	Withstand 6 minutes of alcohol
Temperature Characteristic	Appearance: No damage, Inductance: Within 10% of initial value	-55 ~ +125
Humidity Test	-	602 / 962 HOURS, R.H: 90-95%RH
Low Temperature Storage	-	-552 for 962 HOURS
Thermal Shock Test	-	-555 (30 min) -> +1255 (30 min), 10 Cycles
High Temperature Storage	-	1202 (with applied current)
Life Test (High Temp Load)	No evidence of short or open circuit	1252, 50012 HOURS, Allowed DC Current
Life Test (Humidity Load)	-	602, 90-95% RH, 50012 HOURS, Allowed DC Current
Iron Soldering Profile	-	Power: Max.30W, Preheat: 150/60sec, Solder Time: 3sec. Max., Max. 1 time
Packaging (Reel)	Reel Dimensions: 330mm (A), 21mm (B0.8), 13mm (C0.5), 16.5mm (G), 100mm (N), 21mm (T)	QTY per Reel: 800 PCS
Packaging (Tape)	Peel Force: 0.1N to 1.0N (8mm tape), 0.1N to 1.3N (12mm-56mm tape)	Peel Speed: 300mm/min10mm/min
Package Quantity (Inner Box)	2 Reels (1600 PCS)	Inner Box Dimension: 34346.5cm
Package Quantity (Carton)	2 Inner Boxes (3200 PCS)	Carton Dimension: 36.535.514.5cm
Storage Conditions		-
Transportation	Handle with care, avoid damage/contamination. Use tweezers/vacuum pickup. Minimize abrasion/shock.	-