Durable Ferrite Chip EMI Suppressors XR XRCB2012U121-3R0TF Suitable for Harsh Operating Environments

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Ferrite Chip EMI Suppressors

This specification applies to the ACMS-2012 series Ferrite Chip EMI suppressors, designed for effective noise suppression.

PART NO.	DESCRIPTION	DIMENSION (mm)	OPERATING TEMP. RANGE	STORAGE TEMP. RANGE	IMPEDANCE () AT 100 MHz	DC RESISTANCE () Max	RATED CURRENT (mA) Max
XRCB2012U121-3R0TF	Ferrite Chip EMI Suppressors	L: 2.00.2, W: 1.250.2, T: 0.9+0.15/-0.2, A: 0.2~0.8	-55 ~ +125	-10 ~ +40	12025%	0.05	3000

ITEM	Specification	TEST CONDITIONS
TERMINAL STRENGTH	Without deformation cases impedance shall be satisfied 30% DC resistance shall be satisfied.	Solder chip on PCB and applied 10N (1.02Kgf) for 10 sec.
Substrate bending test	Without deformation cases, impedance shall be satisfied 30% DC resistance shall be satisfied.	After soldering a chip to a test substrate, bend the substrate by 3mm hold for 10s and then return. with the recommended PC board pattern and reflow soldering.
RESISTANCE TO SOLDER HEAT	No visible damage Electrical characteristics and mechanical characteristics shall be satisfied.	Consult standard MIL-STD-202 METHOD 210 Solder Temp. : 2653 Immersion time : 61 sec Preheating : 100 to 150, 1 minute. Measurement to be made after keeping at room temp for 242 hrs. Solder : Sn-3Ag-0.5Cu
SOLDER-ABILITY	95% min. coverage of all metabolised area	Consult standard J-STD-002 Solder temp. : 2405 Immersion time : 31 sec Solder : Sn-3Ag-0.5Cu

TEST TYPE	Performance Specification	Test Condition
HIGH TEMPERATURE RESISTANCE	Appearance: no mechanical damage Impedance: with 30% of initial value DC resistance: satisfied	Temperature: 1252 Applied current: Rated current Testing time: 100812hrs Measurement: After room ambient temp. for 24 hours minimum
HUMIDITY RESISTANCE	Appearance: no mechanical damage Impedance: within 30% of initial value DC resistance: satisfied	Humidity: 90 to 95% RH Temperature: 602 Applied current: Rated current Testing time: 100812hours Measurement: After room ambient temp. for 24 hours minimum
TEMPERATURE CYCLE	Appearance: no mechanical damage Impedance: within 30% of initial value DC resistance: satisfied	Temperature: -55,+125 (30 min each) Cycle: 100 cycles Measurement: After room ambient temp. for 24 hours minimum
LOW TEMPERATURE STORAGE LIFE TEST	Appearance: no mechanical damage Impedance: with 30% of initial value DC resistance: satisfied	Temperature: -552 Testing time: 100812hours Measurement: After room ambient temp. for 24 hours minimum
THERMAL SHOCK	Appearance: no mechanical damage Impedance: with 30% of initial value	Temperature: -55,+125 (30 min each) Cycle: 100 cycles Measurement: After room ambient temp. for 24 hours minimum
VIBRATION TEST	Appearance: no mechanical damage Impedance: with 30% of initial value	Waveform: Sine wave Frequency: 10~55~10 Hz Sweep time: 1min Amplitude: 1.5mm(peak-peak) Direction: X,Y,Z (3 axes) Duration: 2 hrs./axis, total 6 hrs.

ITEM	Dimensions (mm)	Details
PAPER CARRIER TAPE PACKAGING	A: 1.450.05, B: 2.250.05, C: 8.00.1, D: 3.50.05, E: 1.750.1, F: 4.00.1, G: 2.00.05, H: 4.00.1, J: 1.550.05, T: 0.950.05	Leader and trailer tape, Direction, Reels
REELS		Packing Qty: 4,000 PCS/REEL
PEELING STRENGTH OF COVER TAPE		10g~100g, 165~180 peel angle, 300mm/min peel speed
PACKAGING		Tape & Reel packaging, Reel and desiccant in Nylon/plastic bag, Max 5 bags/inner box, Max 6 inner box/outer box
REEL LABEL		Indicate Pb Free, RoHS Compliant
STORAGE		Store at 40 or less and 70% RH or less. Avoid dust, harmful gas, heat, and direct sunlight. Use reels as soon as possible after opening. Solderability valid for 6 months under specified storage conditions.