Magnetic Core Component XR XRT14 5 9 with T1 Material Characteristics and Mechanical Specifications
Product Overview
This document outlines the specifications for the XRT14*5*9 product, including mechanical and electrical requirements, material characteristics, and inspection criteria. It serves as an approval document for customer confirmation.
Product Attributes
- Customer Name: [Not specified]
- Product Model: XRT14*5*9
- Date: 2020-5-9
- Material Type: T1
Technical Specifications
| ITEM | MATERIAL CHARACTERISTIC | Ui | Bs (Gauss) | Hc (A/M) | Bs (MT) | Br (MT) | Tc () | ( cm) | Working Frequency (MHz) | Density (g/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| T1 | Initial Permeability | 70025% | 330 | 35 | 330(1600A/m) | 150 | <140 | 105 | 1-1000 | 4.8 |
| DIMENSION(Unit:mm) | A | B | C | D | E | F | Q | L (uH) | Z1(OHM) MIN | Z2(OHM) MIN |
|---|---|---|---|---|---|---|---|---|---|---|
| SPEC | 14.00 0.50 | 5.00 0.60 | 9.00 0.50 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | 15 | 50 |
| 1 | 14.21 | 5.02 | 9.15 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 2 | 14.16 | 4.98 | 9.07 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 3 | 14.11 | 5.01 | 9.03 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 4 | 14.09 | 4.97 | 9.01 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 5 | 14.09 | 5.05 | 9.04 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 6 | 14.11 | 5.03 | 9.05 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 7 | 14.08 | 5.01 | 9.07 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 8 | 14.13 | 5.05 | 9.11 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 9 | 14.08 | 5.01 | 9.09 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| 10 | 14.11 | 5.03 | 9.07 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| X (AVG) | 14.12 | 5.02 | 9.07 | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] | [Not specified] |
| ELECTRICAL REQUIREMENTS | TEST INSTRUMENTS | TEST FREQUENCY | TEST VALUE | TEMPERATURE | HUMIDITY |
|---|---|---|---|---|---|
| L | Q-METER | 1KHZ/0.25V | [Not specified] uH | 25 | 70% |
| Q | [Not specified] | [Not specified] | [Not specified] MIN | 25 | 70% |
| Z | IMPEDANCE ANALYZER: HP-4191A | 25MHZ | 50 MIN | 25 | 70% |
| Z | IMPEDANCE ANALYZER: HP-4191A | 100MHZ | 50 MIN | 25 | 70% |
Product Appearance Inspection
1. The product must not have obvious defects, stains. Product notches should be less than 1.5mm in length and width, and less than 1.5mm in depth.
2. The inner diameter must not have sharp burrs. Transparent molding is not applicable for this product.
3. If the sample has no issues, please sign and return the approval document as soon as possible. If not returned signed, and an order is received, the product will be shipped according to the standards of this approval document.
Packaging
Inner packaging uses a plastic disc box. Outer packaging uses a carton. Each carton should have a qualified chapter label outside, including product name, quantity, batch number, and inspector.
Approval Signatures
Approved By:
Checked By:
Reported By:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.